JVC FS-B70 Instruction Manual - Page 62

English All Discs Synchronized Recording 1 Insert a recordable cassette into the cassette compartment with the exposed part of the tape facing left. 2 Load discs into the 5-CD Changer. • You can make a program (see page 17) or select the Random Play mode (see page 18) if you want. In this case, you cannot select the starting disc = go to step 5. 3 Press one of the disc number CD 1 buttons (CD 1 - CD 5) on the CD 2 remote control to select the disc CD 3 you want to start recording from, CD 4 then press 7. CD 5 4 Press CD REC MODE on the remote control to select "ALL CD." Each time you press the button, The recording mode changes as follows: CD REC MODE 1 CD ALL CD 1ST TRACK 12345 CD To stop while recording, press 7. The tape stops after 4 seconds. To remove the cassette, press 0 on the unit. TAPE When recording discs A 4-second blank is automatically made on the tape before each track. To record without the blank, follow the procedure below: 1 Load discs you want to record into the 5-CD Changer. 2 Press DISC SELECT on the unit to select the disc number you have loaded. 3 Press #/8 CD on the unit twice so that disc playback is paused. • If the pausing position is not "0:00," you can skip back to "0:00" by pressing 4 DOWN on the unit. 4 Press REC on the unit to start recording. When all loaded discs are recorded, recording will stop. You cannot exchange a disc while recording another disc. Pressing CD REC MODE changes the disc playback mode to Continuous Play and cancels the Repeat Play mode. 5 Press REC. REC The REC indicator lights up on the display and recording starts. 12345 CD REC Current track number Elapsed playing time When all loaded discs are recorded, recording will stop. Both the 5-CD changer and the cassette deck stop automatically. 23