JVC GR D90U Instructions - Page 21

Dubbing Still Images Recorded On A Tape To A Memory Card Still images can be dubbed from a tape to a memory card. 1 Load a memory card (੬ pg. 11) and cassette (੬ pg. 9). 2 Set the VIDEO/DSC Switch 4 to "VIDEO", then set the Power Switch y to "PLAY" while pressing down the Lock Button t. 3 Press the MENU/VOLUME wheel % in. The Menu Screen appears. Rotate it to select " VIDEO" and press it. 4 Rotate the MENU/VOLUME wheel % to select " COPY" and press it. The Sub Menu appears. Rotate it to select "ON" and press it. Selection is complete. 5 Rotate the MENU/VOLUME wheel % to select " RETURN" and press it twice. The normal playback screen reappears. 6 To select a video image to be dubbed, start playback by pressing 4/6 7. At the moment you find the image you wish to dub, press it again to engage Still Playback. 7 To start dubbing, press SNAPSHOT ^. The selected image is stored on the memory card. • " " blinks during dubbing. NOTES: ● If SNAPSHOT ^ is pressed in step 7 when a memory card is not loaded, the message "COPYING FAILED" is displayed. ● To change the Snapshot mode for dubbing, ੬ pg. 25. ● If an image recorded on the tape using the WIDE mode (੬ pg. 29) is dubbed to a memory card, the WIDE mode identifying signal is not dubbed with it. ● To use Playback Special Effects with a video image you wish to dub, perform up to step 7 using the remote control (੬ pg. 35). ● Images are dubbed in 640 x 480 pixels. Display V I DEO 46 COPY - OF F ON Menu Screen Setting Print Information (DPOF Setting) This camcorder is compatible with the DPOF (Digital Print Order Format) standard in order to support future systems such as automatic printing, which records information about the still images you wish to print (such as the number of prints to make). There are 2 print information settings available: "TO PRINT ALL STILL IMAGES (ONE PRINT FOR EACH)" explained below and "TO PRINT BY SELECTING STILL IMAGES AND NO. OF PRINTS". TO PRINT ALL STILL IMAGES (ONE PRINT FOR EACH) 1 Set the VIDEO/DSC switch 4 to "DSC", then set the Power Switch y to "PLAY", while pressing down the Lock Button t located on the switch. • A stored file is displayed. 2 Press the MENU/VOLUME wheel % in. The Menu Screen appears. 3 Rotate the MENU/VOLUME wheel % to select "DPOF" and press it. The Sub Menu appears. 4 Rotate the MENU/VOLUME wheel % to select "ALL 1" and press it. Selection is complete. The DPOF Screen appears. 5 Rotate the MENU/VOLUME wheel % to select "EXECUTE" and press it. The normal playback screen appears. • To cancel selection, rotate the MENU/VOLUME wheel % to select "RETURN" and press it. To Reset The Setting select "RESET" in step 4. The setting is reset to 0 for all still images. TO PRINT BY SELECTING STILL IMAGES AND NO. OF PRINTS 1 Perform steps 1 through 3 of "TO PRINT ALL STILL IMAGES (ONE PRINT FOR EACH)". 2 Rotate the MENU/VOLUME wheel % to select "CURRENT" and press it. Selection is complete. The DPOF Screen appears. 3 Press 2 6 or 3 8 so that the image you wish to print appears. 4 Rotate the MENU/VOLUME wheel % to move the highlight bar to the SHEETS number indication and press it. Continued on next page. ADVANCED FEATURES EN 21 (GR-D90 and GR-D70 only)