JVC GR D90U Instructions - Page 30
Camera Display, Using Menus For Detailed Adjustment, Tally, Remote, Demo Mode, Priority, Cam Reset
UPC - 046838161018
View all JVC GR D90U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
BEEP OFF: Even though not heard while shooting, shutter sound is recorded on the tape. BEEP: The beep sounds when the power is turned on or off, and at the beginning and end of recording. Also to activate the shutter sound effect (੬ pg. 17, 25). [MELODY]: Instead of a beep, a melody sounds when any operation is performed. It also activates the shutter sound effect (੬ pg. 17, 25). TALLY OFF: The tally lamp remains off at all times. [ON]: The tally lamp comes on to signal the start of recording. REMOTE OFF: Disables the camcorder from receiving the remote control's beam signals. The camcorder cannot be operated by the remote control. [ON]: Enables the camcorder to receive the remote control's beam signals. • For GR-D30 Owners: It is recommended that this function be set to "OFF" to prevent improper operation. DEMO MODE OFF: Automatic demonstration will not take place. [ON]: Demonstrates certain functions such as Program AE with special effects, etc., and can be used to confirm how these functions operate. Demonstration starts in the following cases: • When the Menu Screen is closed after "DEMO MODE" is turned "ON". • With "DEMO MODE" set to "ON", if there is no operation for about 3 minutes after the Power Switch y is set to " " or " " . Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 3 minutes after that, the demonstration will resume. NOTES: ● If a tape is in the camcorder, the demonstration cannot be turned on. ● "DEMO MODE" remains "ON" even if the camcorder power is turned off. ● If "DEMO MODE" remains "ON", some functions will not be available. After viewing demo, set to "OFF". PRIORITY [LCD]: When the LCD monitor is fully open, even if the viewfinder is pulled out, the image is displayed only on the LCD monitor; it will not be displayed in the viewfinder. FINDER: When the viewfinder is pulled out, even if the LCD monitor is fully open, the image is displayed only on the viewfinder; it will not be displayed on the LCD monitor. CAM RESET [CANCEL]: Does not reset all settings to the factory-preset. EXECUTE: Resets all settings to the factory-preset. CAMERA DISPLAY • Settings made in the " CAMERA DISPLAY" Menu are effective only for video shooting. • Settings made in the " CAMERA DISPLAY" Menu remain effective even when the Power Switch y is set to " ". However, the menu settings can be changed only when the Power Switch y is set to " ". CAMERA D I SPLAY BR I GHT ON SCREEN - LCD / TV DATE / T I ME - AUTO T I ME CODE - OF F CLOCK DEC 25 '03 ADJ . 5 : 30 PM RETURN BRIGHT ੬ pg. 12, "To Adjust The Brightness Of The Display" ON SCREEN LCD: Keeps the camcorder's display (except the date, time and time code) from appearing on the connected TV screen. [LCD/TV]: Makes the camcorder's display appear on screen when the camcorder is connected to a TV. DATE/TIME OFF: The date/time does not appear. [AUTO]: Displays the date/time for approx. 5 seconds in the following cases: • When the Power Switch y is set from "OFF (CHARGE)" to " " or " ". • When tape playback starts. The camcorder displays the date/time when scenes are recorded. • When the date is changed during tape playback. ON: The date/time is always displayed. • The date indication can also be turned on/off by pressing the DISPLAY Button l on the remote control (provided with GR-D90/D70 only). TIME CODE [OFF]: Time code is not displayed. ON: Time code is displayed on the camcorder and on the connected TV. Frame numbers are not displayed during recording. [ ] = Factory-preset EN 30 USING MENUS FOR DETAILED ADJUSTMENT