JVC GR D90U Instructions - Page 33

Dubbing To Or From A VCR To Use This Camcorder As A Player 1 Following the illustration, connect the camcorder and the VCR. Also refer to pg. 16. 2 Set the VIDEO/DSC Switch 4 to "VIDEO" (GR-D90/ D70 only), then set the camcorder's Power Switch y to "PLAY" while pressing down the Lock Button t located on the switch, turn on the VCR's power, and insert the appropriate cassettes in the camcorder and the VCR. 3 Engage the VCR's AUX and Record-Pause modes. 4 Engage the camcorder's Play mode to find a spot just before the edit-in point. Once it is reached, press 4/6 7 on the camcorder. 5 Press 4/6 7 on the camcorder and engage the VCR's Record mode. 6 Engage the VCR's Record-Pause mode and press 4/6 7 on the camcorder. 7 Repeat steps 4 through 6 for additional editing, then stop the VCR and camcorder when finished. NOTES: ● As the camcorder starts to play your footage it will appear on your TV. This will confirm the connections and the AUX channel for dubbing purposes. ● Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they are being recorded onto the new tape. To choose whether or not the following displays appear on the connected TV . . . • Date/Time ..... set "DATE/TIME" to "AUTO", "ON" or "OFF" in the Menu Screen (੬ pg. 30, 32). Or, press DISPLAY l on the remote control (provided with GR-D90/D70 only) to turn on/off the date indication. • Time Code ..... set "TIME CODE" to "ON" or "OFF" in the Menu Screen (੬ pg. 31, 32). • Indications other than date/time and time code ..... set "ON SCREEN" to "LCD", "LCD/TV" or "OFF" in the Menu Screen (੬ pg. 30, 32). For GR-D90/D70 Owners: To Use This Camcorder As A Recorder 1. Set the VIDEO/DSC Switch 4 to "VIDEO", then set the camcorder's Power Switch y to "PLAY" while pressing down the Lock Button t located on the switch. 2. Set "S/AV INPUT" to "ON" and set "REC MODE" to "SP" or "LP" (੬ pg. 31). 3. Connect the cables as shown in the illustration and load a cassette to record on. 4. Press the Recording Start/Stop button w to engage the Record-Pause mode. " AV. IN " appears on the screen. 5. Press the Recording Start/Stop button w to start recording. 3 rotates. 6. Press the Recording Start/Stop button w again to engage the Record-Pause mode. 3 stops rotating. NOTES: ● After dubbing, set "S/AV INPUT" back to "OFF". ● Analog signals can be converted to digital signals with this procedure. ● It is also possible to dub from another camcorder. 7 4 To AV ( Connector cover* To S-VIDEO ) S-Video cable (optional) To S-VIDEO IN or OUT Audio/ Video cable (provided) Yellow to VIDEO** IN or OUT Red to AUDIO R IN or OUT White to AUDIO L IN or OUT TV VCR * When connecting the cable, open this cover. ** Connect when an S-Video cable is not used. EN DUBBING 33