JVC GR D90U Instructions - Page 31

CLOCK ADJ. Allows you to set the current date and time (੬ pg. 10). DSC (GR-D90/D70 only) DSC QUAL I TY - F I NE I MAGE S I ZE - 1024X768 REC SELECT- RETURN QUALITY , IMAGE SIZE Refer to "Picture Quality/Image Size Setting" (੬ pg. 11). REC SELECT [ ]: When Snapshot recording is performed with the VIDEO/DSC Switch 4 set to "VIDEO", still images are recorded only onto the tape. / : When Snapshot recording is performed with the VIDEO/DSC Switch 4 set to "VIDEO", still images are recorded not only onto the tape but also on the memory card (640 x 480 pixels). In this mode, the "SNAP MODE" selection in the CAMERA Menu is also applicable to memory card recording. For Playback Menu 1 Set the VIDEO/DSC Switch 4 to "VIDEO" (GR-D90/ D70 only), then set the Power Switch y to "PLAY" while pressing down the Lock Button t located on the switch. 2 Press the MENU/VOLUME wheel % in. The Menu Screen appears. 3 Rotate the MENU/VOLUME wheel % to select the desired function menu, and press it. 4 Rotate the MENU/VOLUME wheel % to select the desired function, and press it to display the Sub Menu. 5 Rotate the MENU/VOLUME wheel % to select the desired parameter and press it. Selection is complete. 6 Rotate the MENU/VOLUME wheel % to select " RETURN" and press it twice to close the Menu Screen. VIDEO V I DEO SOUND MODE- STEREO 12B I T MODE- SOUND 1 REC MODE - COPY - OF F S / AV I NPUT- OFF RETURN SOUND MODE pg. 32, "Playback Sound". 12BIT MODE pg. 32, "Display". REC MODE Allows you to set the tape recording mode ([SP] or LP) depending on your preference (੬ pg. 10). It is recommended you use "REC MODE" in the " VIDEO" Menu when using this camcorder as a recorder during dubbing (੬ pg. 33, 34). • "REC MODE" can be set when the Power Switch y is set to "PLAY" or " " (੬ pg. 10, 28). COPY (GR-D90/D70 only) ON: Enables dubbing of images recorded on a tape to a memory card (੬ pg. 21). [OFF]: Enables snapshots to be taken during tape playback. S/AV INPUT (GR-D90/D70 only) ON: Enables audio/video signal input from the AV and S-VIDEO connectors (੬ pg. 33). [OFF]: Enables audio/video signal output to a TV, VCR, etc. via the AV and S-VIDEO connectors (੬ pg. 16, 33). • When "S/AV INPUT" is set to "ON", camcorder playback cannot be viewed on the AV output. SYSTEM S Y S T EM BEEP - MELODY TALLY - ON REMOTE - ON DEMO MODE - ON PR I OR I TY - LCD CAM RESET RETURN Each setting is linked with " SYSTEM", which appears when the Power Switch y is set to " " (੬ pg. 30). The parameters are the same as in the description on pg. 30. [ ] = Factory-preset EN 31 USING MENUS FOR DETAILED ADJUSTMENT