JVC GR D90U Instructions - Page 24

Fader, White, Black, Corner, Window, Slide, Scroll, Shutter, For Recording, Video/dsc, Menu/volume - windows 7

Page 24 highlights

Fade/Wipe Effects These effects let you make pro-style scene transitions. Use them to spice up the transition from one scene to the next. Fade or Wipe works when tape recording is started or when you stop recording. 1 Set the VIDEO/DSC Switch 4 to "VIDEO" (GR-D90/ D70 only), then set the Power Switch y to " " while pressing down the Lock Button t located on the switch. Open the LCD monitor fully or pull out the viewfinder fully. 2 Press the MENU/VOLUME wheel % in. The Menu Screen appears. 3 Rotate the MENU/VOLUME wheel % to select " WIPE/FADER", then press it. 4 Rotate the MENU/VOLUME wheel % to select the desired function, then press it. Selection is complete. Press the MENU/VOLUME wheel % in again. • The WIPE/FADER Menu disappears and the effect is reserved. The indicator representing the selected effect appears. 5 Press the Recording Start/Stop Button w to activate the Fade-in/out or Wipe-in/out. To Deactivate The Selected Effect select "OFF" in step 4. IMPORTANT Some Fade/Wipe Effects cannot be used with certain modes of Program AE with special effects (੬ pg. 23). If an unusable Fade/Wipe Effect is selected, its indicator blinks or goes out. NOTE: You can extend the length of a Fade or Wipe by pressing and holding the Recording Start/Stop Button w. FADER - WHITE Fade in or out with a white screen. FADER - BLACK Fade in or out with a black screen. FADER - B.W Fade in to a color screen from a black and white screen, or fade out from color to black and white. WIPE - CORNER Wipe in on a black screen from the upper right to the lower left corner, or wipe out from lower left to upper right, leaving a black screen. WIPE - WINDOW The scene starts in the center of a black screen and wipes in toward the corners, or comes in from the corners, gradually wiping out to the center. WIPE - SLIDE Wipe in from right to left, or wipe out from left to right. WIPE - DOOR Wipe in as the two halves of a black screen open to the left and right, revealing the scene, or wipe out and the black screen reappears from left and right to cover the scene. WIPE - SCROLL The scene wipes in from the bottom to the top of a black screen, or wipes out from top to bottom, leaving a black screen. WIPE - SHUTTER Wipe in from the center of a black screen toward the top and bottom, or wipe out from the top and bottom toward the center leaving a black screen. ^ % w ty EN 24 FOR RECORDING

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

EN
24
Fade/Wipe Effects
These effects let you make pro-style scene transitions.
Use them to spice up the transition from one scene to
the next.
Fade or Wipe works when tape recording is started or
when you stop recording.
1
Set the
VIDEO/DSC
Switch
4
to
VIDEO
(GR-D90/
D70 only), then set the Power Switch
y
to
while
pressing down the Lock Button
t
located on the
switch. Open the LCD monitor fully or pull out the
viewfinder fully.
2
Press the
MENU/VOLUME
wheel
%
in. The Menu
Screen appears.
3
Rotate the
MENU/VOLUME
wheel
%
to select
WIPE/FADER
, then press it.
4
Rotate the
MENU/VOLUME
wheel
%
to select the
desired function, then press it. Selection is complete.
Press the
MENU/VOLUME
wheel
%
in again.
The WIPE/FADER Menu disappears and the effect is
reserved. The indicator representing the selected
effect appears.
5
Press the Recording Start/Stop Button
w
to activate
the Fade-in/out or Wipe-in/out.
To Deactivate The Selected Effect . . .
.....
select
OFF
in step
4
.
IMPORTANT
Some Fade/Wipe Effects cannot be used with certain
modes of Program AE with special effects (
±
pg. 23).
If an unusable Fade/Wipe Effect is selected, its
indicator blinks or goes out.
NOTE:
You can extend the length of a Fade or Wipe by pressing
and holding the Recording Start/Stop Button
w
.
FADER
WHITE
Fade in or out with a white screen.
FADER
BLACK
Fade in or out with a black screen.
FADER
B.W
Fade in to a color screen from a black and white
screen, or fade out from color to black and white.
WIPE
CORNER
Wipe in on a black screen from the upper right to the
lower left corner, or wipe out from lower left to upper
right, leaving a black screen.
WIPE
WINDOW
The scene starts in the center of a black screen and
wipes in toward the corners, or comes in from the
corners, gradually wiping out to the center.
WIPE
SLIDE
Wipe in from right to left, or wipe out from left to right.
WIPE
DOOR
Wipe in as the two halves of a black screen open to the
left and right, revealing the scene, or wipe out and the
black screen reappears from left and right to cover the
scene.
WIPE
SCROLL
The scene wipes in from the bottom to the top of a
black screen, or wipes out from top to bottom, leaving a
black screen.
WIPE
SHUTTER
Wipe in from the center of a black screen toward the
top and bottom, or wipe out from the top and bottom
toward the center leaving a black screen.
FOR RECORDING
t
w
%
y
^