Kenmore 3243 Installation Instructions - Page 5

Typical Under Counter Installation of an Electric Built-in Oven with a Cooktop Mounted Above All mounting hardware must be used to secure the builtqn oven to tile cabinets. Refer to the builtqn oven installation instructions. Junction box must be located approx. 3" to the left of the builtqn oven cutout, This cooktop may be installed over certain builtqn elee tric oven models. Side filler panels are necessary to isolate the unit from adjoining cabinets. Panel height should allow for installation of approved cooktop models. See "Typical Gas Cooktop Installation Over an Electric Builtqn Oven Installed Under the Counter" on previous page. 32" Min.** (81.3 cm) 36" (91.4 cm) 208/240 Volt grounded junction box for built-in Use 3/4" (1.9 cm) plywood, installed on two runners, flush with toe plate. Must be capable of supporting 150 Ibs. Cut an opening in wood base minimum 9" (22.9 cm) x 9" (22.9 cm), 2" (5.1 cm) from left side filler panel, to route armoured (.able to junction box. 4 1/2" (11.4 cm) Max.* * If no cooktop is installed directly over the oven unit, S" (12.7 cm) maximum is allowed. ** 32" (81.3 cm) min. from top of cabinet to top of runners must be maintained. OVEN SIZE 30" (76,2cm) 27" (68,6crn) CUTOUT DIMENSIONS (inches) Min 27¼" (69,2cm) E Max, 28s/_" - (727cm) Min 281/2" (72,4cm) F Max, 29" - (737cm) 27¼" (69,2crn) 28s/_" - (727cm) 24V8" (63,1cm) 25¼" (641cm) G 23Y2" (59,7cm) 23Y2" (59,7cm)