Kenmore 6593 Use and Care Guide - Page 10
Handles
View all Kenmore 6593 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Handles If not installed, the handle is located in the interior of the fresh food section. Remove and discard handle packaging and tape. Fresh Food Handles Standard Front Mount Handle Materials Needed: • Phillips screwdriver • '/4" hex head driver To install: 1. Remove '/4" hex head screws from door face with hex head driver, and Phillips screw from top of door. • If reversing door, remove door plugs from opposite side of door and insert in screw holes. 2, Align handle holes with screw holes on door face and secure with two door face screws from step 1. 3. Locate handle trim in literature pack and install over top and bottom of handle, as illustrated. • Secure top handle trim with remaining screw removed in step 1. • Snap bottom trim over bottom portion of handle. To Remove: 1. Remove top handle trim by removing top handle screw. • Retain trim and screw for later replacement. 2. Pry bottom handle trim from handle with screwdriver flat blade wrapped in masking tape. • Retain trim for later replacement. 3. Remove two hex head screws. • Retain screws for later replacement. Freezer Handle Materials Needed: • Phillips screwdriver To Install: 1. Install handle by fastening with screws removed from edge of door. • If reversing freezer door, remove door plugs from top edge of door and insert into screw holes. To Remove: 1. Remove handle screws with Phillips screwdriver and retain screws for later use. 10