Kenwood DNX5140 Instruction Manual

Kenwood DNX5140 - Wide Double-DIN In-Dash Nagivation Manual

Get Kenwood DNX5140 - Wide Double-DIN In-Dash Nagivation PDF manuals and user guides
UPC - 019048181411
View all Kenwood DNX5140 manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood DNX5140 manual content summary:

  • Kenwood DNX5140 | Instruction Manual - Page 1
    /6000EX DNX5140 MONITOR WITH DVD RECEIVER DDX514 DDX5034/BT INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new GPS Navigation System/DVD Receiver. For your records
  • Kenwood DNX5140 | Instruction Manual - Page 2
    10 Before Use 6 Notes 7 Navigation Control 14 Using the Navigation System 14 Navigatoin Information Interrupt on the Screen of Other Sources (DNX6140/DNX6000EX/DNX5140 only) 14 Control of Other Sources While Displaying the Navigation Screen 15 Watching DVD/VCD 16 Functions During
  • Kenwood DNX5140 | Instruction Manual - Page 3
    87 Tone Setup 88 Zone Control 88 Remote Controller 90 Battery installation 90 Remote Controller mode switch 90 Common operations (AUD mode) 91 DVD/VCD/CD/Audio files (DVD mode) 92 Radio (AUD mode) 93 DVD Language Codes 94 Help? Troubleshooting 96 Help? Error 98 Specifications
  • Kenwood DNX5140 | Instruction Manual - Page 4
    memory one after another. Switches to the next frequency manually. Manual Memory Stores the current receiving station in memory. 1 Select a station you wish to store in memory 2 Store in memory Next page 3 4 DNX6140/DNX6000EX/DNX5140/DDX514/DDX5034/DDX5034BT The above operation example with the
  • Kenwood DNX5140 | Instruction Manual - Page 5
    English 5
  • Kenwood DNX5140 | Instruction Manual - Page 6
    RW recorder instruction manual.) • If you try to load a 3-inch-disc with its adapter into the unit, the adapter might separate from the disc and damage the unit. Other notes • If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check
  • Kenwood DNX5140 | Instruction Manual - Page 7
    /DDX5034BT only) • KNA-G510* • KNA-G431* • KNA-DV4100 • KNA-DV3100 • KNA-DV2100 * Update the navigation software to the latest version. For how to update the software, refer to the instruction manual of the navigation unit. iPod/iPhone models that can be connected to this unit Made for
  • Kenwood DNX5140 | Instruction Manual - Page 8
    first setout is played. • Playable disc media CD-R/RW/ROM, DVD±R/RW • Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name. • Playable USB device USB mass storage class, iPod with KCA-iP301V • Playable USB device file system FAT16, FAT32 Although the audio files are
  • Kenwood DNX5140 | Instruction Manual - Page 9
    Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. 1 5 2 1 4 2 6 2 3 1 5 4 DVD disc marks Symbol Description ALL Indicates a region number. The discs with this mark can be played with any DVD
  • Kenwood DNX5140 | Instruction Manual - Page 10
    the USB device Press on the USB control screen to enter the USB suspend mode, and then remove the USB device. See (page 34). ¤ • Removing the USB device before entering the USB suspend mode may result in damaging the data in the USB device. 10 DNX6140/DNX6000EX/DNX5140
  • Kenwood DNX5140 | Instruction Manual - Page 11
    Control screen. 6 Displays the Audio Control Menu screen. (page 86) 7 Displays the Setup Menu screen. (page 60) 8 Clock display 9 ⁄ • If a Bluetooth Unit is not connected, [TEL] will not appear. 9 Displays the Full of supported discs and formats. Removing a disc Press [0] (Eject) button. English
  • Kenwood DNX5140 | Instruction Manual - Page 12
    to switch to rear view. Press it again for more than 1 second to resume the normal display. ⁄ • Functions of the [NAV] button can be changed to Display Off function. See (page 64) for the function setting of the [NAV] button. 12 DNX6140/DNX6000EX/DNX5140/DDX514/DDX5034/DDX5034BT
  • Kenwood DNX5140 | Instruction Manual - Page 13
    playback screen [FNC] button Easy Control buttons appear. Source Control screen [FNC] button Navigation information appears.* *DNX6140/DNX6000EX/DNX5140 only Navigation screen Picture or Video playback screen DVD VIDEO Mode:Full AV - O U T: AV - I N SCRN Easy Control button DVD VIDEO Title
  • Kenwood DNX5140 | Instruction Manual - Page 14
    the Screen of Other Sources (DNX6140/DNX6000EX/DNX5140 only) Interrupts other source screen and displays information such as guide point. While a control screen is displaying: Navigation information appears on the bottom of the screen. 1 1 Displays the Navigation information. When touched this area
  • Kenwood DNX5140 | Instruction Manual - Page 15
    Navigation Screen Selected source can be controlled while displaying navigation screen. 1 Display the easy control buttons When "DVD" is selected: 1 2 2 3 4 5 1 Displays the Screen Control screen. See (page 47). 2 During DVD control screen appears. When "Bluetooth" is
  • Kenwood DNX5140 | Instruction Manual - Page 16
    watch DVD/VCD, see (page 10). • Set the remote controller mode switch to "DVD" mode before starting operation, see
  • Kenwood DNX5140 | Instruction Manual - Page 17
    Plays or pauses. ⁄ • When the navigation screen is displayed, press the [NAV] button to switch to the source playback screen. • The Easy Control Panel is hidden when you touch a central part of the monitor. DVD VIDEO Mode:Full AV - O U T: AV - I N SCRN DVD VIDEO Title 1 C h a p 1 T 0:00:05 IN
  • Kenwood DNX5140 | Instruction Manual - Page 18
    Watching DVD/VCD 9 Stops Turns the PBC function of VCD On or Off. (only when VCD Ver 2.0 is in use) i Appears when PBC is On. o VCD version indicator DVD Disc Menu Selects an option from the DVD Disc Menu. 1 Display the Disc Menu Control screen DVD VIDEO Mode:Full AV - O U T: AV - I N DVD
  • Kenwood DNX5140 | Instruction Manual - Page 19
    Menu screen. When you touch the screen, you can select the DVD menu. MenuCtrl Top Menu Return En t e r Highlight Canc e l Ex i t H i g h l i gh t On ⁄ • To cancel Highlight Control, press [FNC] button. 2 Select Disc Menu options Disc Menu MenuCtrl Top Menu Return En t e r Highlight
  • Kenwood DNX5140 | Instruction Manual - Page 20
    Watching DVD/VCD VCD Zoom Control Displays an enlarged VCD screen. 1 Display the Zoom Control screen DVD VCD Mode:Full AV - O U T: AV - I N DVD VCD PBC Scene VER2 ST 3 IN P 0:05 AF Z o omC t r l 2 2 2 1 Z o om x 2 2 3 Ex i t 1 Changes the zoom ratio at 2 levels (2 times or off ) each
  • Kenwood DNX5140 | Instruction Manual - Page 21
    files. Functions While Displaying the Control Screen Switches to the source control screen to use various playback functions. or [DVD] button on the "Source 15 16 17 1 Switches to the wallpaper. 2 Track (Music) Number Display 3 Play Mode Display 4 Play Time Display Next page 3 English 21
  • Kenwood DNX5140 | Instruction Manual - Page 22
    is no playback screen, wallpaper is displalyed. o Folder and File Number Display ; Play Mode Display a Play Time Display s Music information display Selects Folder Name, File Name, Title, hierarchy level. T Displays the currently playing file. 22 DNX6140/DNX6000EX/DNX5140/DDX514/DDX5034/DDX5034BT
  • Kenwood DNX5140 | Instruction Manual - Page 23
    Video File/Picture File Watching You can recall various control screens during playback of video file (MPEG 1 information can be displayed automatically when it is updated. [DVD] button on the "Source Select" screen DVD MEDIA 4 Mode:Full 5 AV - O U T: AV - I N 3 6 DVD MEDIA 1 2 2 1 P 0:00:
  • Kenwood DNX5140 | Instruction Manual - Page 24
    . 3 Plays or pauses. ⁄ • When the navigation screen is displayed, press the [NAV] button to switch to the source playback screen. • The Easy Control Panel is hidden when you touch a central part of the monitor. DVD MEDIA Mode:Full AV - O U T: AV - I N SCRN DVD MEDIA 2 1 P 0:00:05 PICTURE IN
  • Kenwood DNX5140 | Instruction Manual - Page 25
    the top hierarchy level. j Moves up a hierarchy level. k Displays the currently playing file. Picture Control Adjusting the video display. 1 Start Picture Control DVD MEDIA Mode:Full AV - O U T: AV - I N DVD MEDIA 2 1 P 0:00:05 IN 2 Adjust the video display Picture Ctrl 2 3 1 4 Exit
  • Kenwood DNX5140 | Instruction Manual - Page 26
    , see (page 10). • Set the remote controller mode switch to "AUD" mode before starting operation, see (page 90). Functions While Displaying the Control Screen Switches to the source control screen to use various functions. [TUNER] button on the
  • Kenwood DNX5140 | Instruction Manual - Page 27
    o Memorized stations are displayed. Touch to tune in. ; Scrolls the list. a Switches the list display name to Station name or Program Service Name. The mode is switched in following order each time you touch the button. Display "AUTO1" "AUTO2" "MANU" Setting Tunes in a station with good reception
  • Kenwood DNX5140 | Instruction Manual - Page 28
    good reception in memory automatically. 1 Select a band you wish to store in memory Manual Memory Stores the current receiving station in memory. 1 Select a station you wish to store in memory 2 Select the Auto Memory mode 2 Store in memory 3 Start Auto Memory Continue to touch until the memory
  • Kenwood DNX5140 | Instruction Manual - Page 29
    Name set 3 Enter the name See (page 46) for information on how to enter a name. 1 4 End Name set 2 2 1 Selects the Program Service Name, Title & Artist name, Station Name, Radio Text Plus, or Radio Text for text display. When is appeared, the text display is scrolled by
  • Kenwood DNX5140 | Instruction Manual - Page 30
    is switched to the traffic information and it is displayed automatically. 1 Set the Traffic information mode Search for Program Type A program is tuned when you set its program type. (Only when . 3 Search a station of the selected Program Type 30 DNX6140/DNX6000EX/DNX5140/DDX514/DDX5034/DDX5034BT
  • Kenwood DNX5140 | Instruction Manual - Page 31
    Mode:Full AV - O U T: AV - I N SCRN 1 iPod 1 00002/00006 2 P IN 0:00:05 . 1 Music/Video Search. 2 Plays or pauses. ⁄ • When the navigation screen is displayed, press the [NAV] button to switch to the source playback screen. • The Easy Control Panel is hidden when you touch a central part
  • Kenwood DNX5140 | Instruction Manual - Page 32
    Functions While Displaying the Control Screen Switches to the source control screen to use various playback functions. When Video or picture is playing, press the [FNC] button. iPod Mode:Full AV - O U * Disabled when VIDEO is being played. 32 DNX6140/DNX6000EX/DNX5140/DDX514/DDX5034/DDX5034BT
  • Kenwood DNX5140 | Instruction Manual - Page 33
    1 20 20 19 21 22 23 o Categories and music are listed. Touch a category name to move its lower level. If music title is displayed, the music is played by touching it. When is appeared, the text display is scrolled by pressing it. When is appeared, all the music in its category is played by
  • Kenwood DNX5140 | Instruction Manual - Page 34
    . 1 Selects a file. 2 Plays or pauses. ⁄ • The Easy Control Panel is hidden when you touch a central part of the monitor. USB Mode:Full AV - O U T: AV - I N SCRN USB or 0002/0006 P 0:00:05 IN [USB] button on the "Source Select" screen 34 DNX6140/DNX6000EX/DNX5140/DDX514/DDX5034/DDX5034BT
  • Kenwood DNX5140 | Instruction Manual - Page 35
    no playback screen, wallpaper is displalyed. 2 Track Number Display 3 Play Mode Display 4 Play Time Display 5 Music information display Selects the Folder Name, to play the music or data of the present folder. (Only in Folder Select Mode) 1 22 22 21 23 24 25 26 The display above can also be the
  • Kenwood DNX5140 | Instruction Manual - Page 36
    USB Device Control Folder Select Searches folders and Audio files stored in the USB device according to hierarchy. 1 Start Folder Select 2 Select music 1 2 3 4 2 5 6 1 the top page of the list. 6 Displays the currently playing file. 36 DNX6140/DNX6000EX/DNX5140/DDX514/DDX5034/DDX5034BT
  • Kenwood DNX5140 | Instruction Manual - Page 37
    Sirius/XM Control (North American sales area only) Various control screens appear in the Satellite radio source mode. (with the optional accessory Satellite radio connected only. To connect the Sirius tuner, a conversion cable CA-SR20V (optional accessory) is necessary and to connect the XM tuner,
  • Kenwood DNX5140 | Instruction Manual - Page 38
    Sirius/XM Control (North American sales area only) Channel Search Specifying the desired category and selecting a channel. 1 Start Channel Search Channel Channel Name, Category Name, Song Title, Artist Name, to Composer Name. (Sirius only) 38 DNX6140/DNX6000EX/DNX5140/DDX514/DDX5034/DDX5034BT
  • Kenwood DNX5140 | Instruction Manual - Page 39
    Direct Channel Search Tuning in by entering the desired channel number. 1 Start Direct Channel Search 2 Enter the channel number 1 2 3 1 Enters the channel number. 2 Cancels the direct channel search. 3 Clears the channel number. 3 Tune in the channel  : Press for # seconds. English 39
  • Kenwood DNX5140 | Instruction Manual - Page 40
    appear in the HD Radio Source mode. (with the optional accessory HD Radio tuner connected only) Functions While Displaying the Control Screen Switches to the source control screen to use various functions. 9 Switches the button display. p Selects the Auto Memory mode. Refer to (page
  • Kenwood DNX5140 | Instruction Manual - Page 41
    Setting Tunes in a station with good reception automatically. Tunes in stations in memory one after another. Switches to the next frequency manually. 2 Select the Auto Memory mode 3 Start Auto Memory Save six stations with the best reception in the memory and close Auto Memory Entry. English 41
  • Kenwood DNX5140 | Instruction Manual - Page 42
    2 1 The Receive mode switches in the following order. Auto: Automatically tunes to analog broadcast when there is no digital broadcast. Digital: Digital broadcasts only. Analog: Analog broadcasts only. 2 Returns to the HD Radio control screen. 42 DNX6140/DNX6000EX/DNX5140/DDX514/DDX5034/DDX5034BT
  • Kenwood DNX5140 | Instruction Manual - Page 43
    English 43
  • Kenwood DNX5140 | Instruction Manual - Page 44
    Bluetooth Audio Control You can listen to audio files stored in Bluetooth audio player and cell-phone. For DNX5140/DDX514/DDX5034, Bluetooth unit KCA-BT200 (optional accessory) is necessary. Before Use For DNX6140/DNX6000EX/DDX5034BT : • You need to register your audio player and cell-phone before
  • Kenwood DNX5140 | Instruction Manual - Page 45
    . The system resumes playing automatically. ⁄ • To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to . English 45
  • Kenwood DNX5140 | Instruction Manual - Page 46
    . If you erase a character, locate the cursor on it and touch this button. 6 Clears the character. 7 Exits the Character Entry mode and returns to the previous screen. ⁄ • You can enter characters only after you have applied the parking brake. 46 DNX6140/DNX6000EX/DNX5140/DDX514/DDX5034/DDX5034BT
  • Kenwood DNX5140 | Instruction Manual - Page 47
    the Screen Control screen DVD VIDEO Mode:Full AV - O U T: AV - I N Turning the Dimmer function On or Off according to the Navigation Day/Night display setting. 7 Returns to the previous screen. ⁄ • The Screen Control screen is displayed only when you have applied the parking brake. • The picture
  • Kenwood DNX5140 | Instruction Manual - Page 48
    the Hands Free control mode. For DNX5140/DDX514/DDX5034, Bluetooth unit KCA-BT200 (optional accessory) is necessary. Before Use • To use the Phonebook, it must be downloaded to this unit in advance. For details, see (page 48). For DNX6140/DNX6000EX/DDX5034BT : • You need
  • Kenwood DNX5140 | Instruction Manual - Page 49
    : Displays short message status. If a cellphone which supports SMS function is not connected, this mark does not appear. : There is unread short message. : There is no unread short message. : Downloading Phonebook. : Indicates there is a call on hold. : Displays the signal strength.* The more the
  • Kenwood DNX5140 | Instruction Manual - Page 50
    Hands Free Unit Control Calling by Entering a Phone Number Makes a call by entering a 34 1 Calls the entered phone number. 2 Creates an SMS for the entered phone number. See (page 59). 3 Clears the number. 4 Returns to the previous screen. 3 Make a call You can start
  • Kenwood DNX5140 | Instruction Manual - Page 51
    Controlling Tone-based Services Uses tone base service using DTMF (Dual Tone Multi Frequency). 1 Display the DTMF input character you have touched. 2 Scrolls the character array display. 3 Returns to the Hands-Free Control screen. Initial number screen 4 2 2 3 4 Displays a list of numbers in the
  • Kenwood DNX5140 | Instruction Manual - Page 52
    Short Message Service)> (page 59). y Scrolls the phone number. u Displays the Phonebook data list. i Returns to the Hands-Free Control screen. 5 Make a call ⁄ • To use the Phonebook, it must have been downloaded from the cell-phone. For more details, see the instruction manual of your Bluetooth Unit
  • Kenwood DNX5140 | Instruction Manual - Page 53
    screen 1 3 4 2 5 2 6 1 Outgoing Calls list. 2 Scrolls the list. 3 Makes a call to the selected number. 4 Creates an SMS for the selected phone number. See (page 59). 5 Displays the detail of the selected phone number. 6 Returns to the Hands-Free
  • Kenwood DNX5140 | Instruction Manual - Page 54
    Control . 4 Creates an SMS to the displayed address. See (page 59). 5 Selects the Phone number category. 6 Scrolls the phone number. 7 Displays the Phonebook data list. 8 Returns to the Hands-Free Control screen. 4 Make a call 2 Make a call. 2 Displays the phonebook
  • Kenwood DNX5140 | Instruction Manual - Page 55
    Beep is canceled. 5 Sets the beep of the incoming SMS. ( "ON") "ON": Beep is heard. "OFF": Beep is canceled. 6 Returns to the Hands-Free Control screen. 7 Returns to the "HandsFree Setup 1" screen. 8 Sets whether to use cell-phone phonebook, outgoing calls list and incoming calls list. ( "ON") "ON
  • Kenwood DNX5140 | Instruction Manual - Page 56
    Control Voice Registration Registers voice for voice recognition in Phonebook. Up to 35 voices can be recorded in one cell-phone. 1 Select the name to register Go through the procedure of (page 51). 1 1 Selects a name. "REC" turns /DNX6000EX/DNX5140/DDX514/DDX5034/DDX5034BT
  • Kenwood DNX5140 | Instruction Manual - Page 57
    Word List screen Display the "Hands Free" screen and touch [Setup]. See (page 48). 2 Select the Phone number category to register End voice registration 5 1 Selects the Phone number category. "REC" turns on for data with voice for voice recognition already registered. 2
  • Kenwood DNX5140 | Instruction Manual - Page 58
    Hands Free Preset List screen Display the "Hands Free" screen and touch [Setup]. See (page 48). p Deletes the currently displayed phone number. q Returns to the number. 9 Registers the currently displayed phone number. 58 DNX6140/DNX6000EX/DNX5140/DDX514/DDX5034/DDX5034BT
  • Kenwood DNX5140 | Instruction Manual - Page 59
    SMS (Short Message Service) Uses SMS function. 1 Display the SMS Select screen 2 Select a function 1 2 3 4 5 will be active. 4 Retrieves SMS messages from the cell- phone. 5 Returns to the Hands-Free Control screen. 3 Select message to display 6 7 8 9 8 6 Calls the number in the selected
  • Kenwood DNX5140 | Instruction Manual - Page 60
    following conditions: - When no source is selected. - When dual zone function is set to on. See (page 88). 2 Setup each item 1 2 3 4 1 Selects the speaker to set the crossover. screen. See (page 61). 60 DNX6140/DNX6000EX/DNX5140/DDX514/DDX5034/DDX5034BT
  • Kenwood DNX5140 | Instruction Manual - Page 61
    speaker. 2 Sets the High Pass Filter of the rear speaker. 3 Sets the Low Pass Filter of the to the "Audio Setup" screen. DVD Setup You can set up the DVD play. 1 Display the DVD Setup screen Touch Menu" screen ( software. The operation is available during the play stop mode. Next page 3 English 61
  • Kenwood DNX5140 | Instruction Manual - Page 62
    and returns to the "DVD Setup 1" screen. (It appears after you have entered a language code.) 5 Clears the language code. 3 Enter a language code See (page 95) and select the desired language. 4 Set the language you use 62 DNX6140/DNX6000EX/DNX5140/DDX514/DDX5034/DDX5034BT
  • Kenwood DNX5140 | Instruction Manual - Page 63
    the setup 6 6 7 6 Selects a parental level. 7 Complete the parental level setup and returns to the "DVD Setup 2" screen. ⁄ • If a disc has higher parental lock level, you need to enter the code number. • The parental lock level varies depending on a loaded disc. • If a disc has no parental lock
  • Kenwood DNX5140 | Instruction Manual - Page 64
    manually. 4 Selects a remote control signal. ( "ON") When turned "OFF", the remote control of TV reception is rejected. 5 Sets a music CD playback. ( "1") "1": Automatically recognizes and plays back an Audio file disc, a DVD only when in Standby mode) "Rear" : Rear sound is output. "Subwoofer
  • Kenwood DNX5140 | Instruction Manual - Page 65
    t Selects a picture display time. ( "Long") The Display of a JPEG picture is changed. ("Short", "Middle", "Long") Panel Color Coordinate Sets the screen and button illumination color. 1 Display the Panel Color Coordinate screen  : Press for # seconds. 4 Adjusts the Blue value. 5 Returns to the "
  • Kenwood DNX5140 | Instruction Manual - Page 66
    to return to the DVD (or USB). Use the easy control buttons to operate the front source. 8 Sets output of operation screen such as control screen to AV-OUT. Operation screen is not output when set to "Black". ( "Through") 9 Sets a method to switch to the rear view camera video display. ( "OFF") "ON
  • Kenwood DNX5140 | Instruction Manual - Page 67
    the volume during voice guidance of the navigation system. ( "ON") When turned "ON", the volume level drops for voice guidance. t Sets the guide display method of the Navigation system. ( "ON") (DNX6140/ DNX6000EX/DNX5140 only) "ON" : Pops up the guide. "OFF" : Guide is not displayed. English 67
  • Kenwood DNX5140 | Instruction Manual - Page 68
    q Moves to the "User Interface 4" screen. w Sets an on-screen display of the DVD Playback screen. ( "Manual") "Auto": Information is displayed for 5 seconds when updated. "Manual": Information is displayed when you touch on the screen. e Sets an on-screen display of the USB Playback screen. ( "Auto
  • Kenwood DNX5140 | Instruction Manual - Page 69
    Source Button Setup Registers the source displayed in the favorite source screen. 1 Displays the Direct SRC button Setup screen See (page 68). 2 Select a preset button 3 2 3 1 4 1 Selects the preset button to register. 2 Selects the source to register. 3 Scrolls the source
  • Kenwood DNX5140 | Instruction Manual - Page 70
    to Media Select screen. 4 Returns to the previous folder. 5 Returns to the "User Interface" screen. 5 Load the image 7 6 6 1 1 Returns to the "User Interface" screen. ⁄ • This operation is not possible when USB/DVD is selected as the source. 6 Rotates the image. 7 Returns to the Picture Select
  • Kenwood DNX5140 | Instruction Manual - Page 71
    background. 2 Returns to the original screen. 3 Set the image as the background ⁄ • This operation is not possible when USB/DVD is selected as the source. 1 2 Follow the instruction on the screen and touch the center of . 1 Cancels the adjustment and returns to the Touch Panel Adjust screen
  • Kenwood DNX5140 | Instruction Manual - Page 72
    5 Dimmer Mode Setup "On": The display dims. "Off": The display doesn't dim. "SYNC": Turning the Dimmer function On or Off when the vehicle light control switch is turned On or Off. "NAV-SYNC" (DNX6140/DNX6000EX/ DNX5140 only): Turning the Dimmer function On or Off according to the Navigation Day
  • Kenwood DNX5140 | Instruction Manual - Page 73
    You can select any of the following screen mode. "Full", "Just", "Zoom", "Normal" e Selects a screen mode of the rear view camera (R-CAM) screen. You can select any of the following screen mode. "Full", "Just", "Zoom", "Normal" ⁄ • When you select the Menu or Navigation, the display is shown in the
  • Kenwood DNX5140 | Instruction Manual - Page 74
    Step 3 for confirmation. ⁄ • If you enter a different security code, the screen returns to Step 3 (for the first code entry). 6 Register the security code again 1 2 1 Displays the Security code input screen. 2 Turns the SI function on or off. If turned "ON", the burglar alarm lamp flashes when the
  • Kenwood DNX5140 | Instruction Manual - Page 75
    the Reset button or if you have disconnected the Receiver from battery... 1 Enter the correct security code Deactivating Security Code To deactivate the Security Code function. 1 Display Security Code Setup screen Touch Menu" screen (page 60). in the "Setup 2 Start to cancel a registration of
  • Kenwood DNX5140 | Instruction Manual - Page 76
    playback speed. 2 Sets Wide Screen on or off. ⁄ • "Wide Screen" cannot be set while the iPod is connected. 1 Sets the Parental lock code. See (Page 77). 2 Switch the Parental lock function on and off. See (Page 78). 3 Sets the channel to
  • Kenwood DNX5140 | Instruction Manual - Page 77
    te current setup and returns to the SIRIUS Setup screen. 3 Determines the code number and displays the Parental Code 1st screen. 4 Clears the code number. 5 Returns to the "SIRIUS Setup" screen. ⁄ • If you are to register the parental code for the first time, this screen will not appear. Go to Step
  • Kenwood DNX5140 | Instruction Manual - Page 78
    to input the code once more. 3 Select a category 1 2 2 3 4 1 Displays all the channels in the selected category. The category name scrolls by pressing . 2 Scrolls the category list. 3 Displays all the channels. 4 Returns to the "SIRIUS Setup" screen. 78 DNX6140/DNX6000EX/DNX5140/DDX514/DDX5034
  • Kenwood DNX5140 | Instruction Manual - Page 79
    screen (page 60). in the "Setup 2 Setup each item 1 2 1 Sets cell-phone for Hands Free and Audio player for Bluetooth Audio. 2 Sets the PIN code of this unit (DNX6140/ DNX6000EX/DDX5034BT only) or KCABT200 to enter when registering (pairing) from the cell-phone or audio player side. English 79
  • Kenwood DNX5140 | Instruction Manual - Page 80
    PIN code is correct, try (page 81). 6 10 10 7 8 9 11 6 Displays the searched Bluetooth unit. 7 Scrolls the name of the Bluetooth unit. 8 Cancels searching of Bluetooth unit. 9 Starts search. p Scrolls. q Returns to the previous screen. 80 DNX6140/DNX6000EX
  • Kenwood DNX5140 | Instruction Manual - Page 81
    Registering Bluetooth Unit PIN Code Sets the PIN code of this unit (DNX6140/ DNX6000EX/DDX5034BT only) or KCA-BT200 to enter when registering (pairing) from the cellphone or audio player side. 1 Display the Receiver PIN Code screen Registering Special Bluetooth Unit Registers Special Bluetooth unit
  • Kenwood DNX5140 | Instruction Manual - Page 82
    screen 2 Select a registered Bluetooth unit 1 2 2 Select a Bluetooth unit to delete 3 1 Displays the registered Bluetooth unit. 2 Scrolls the name of the Bluetooth unit. 3 Returns to the previous screen. 3 Select the service to use 3 Delete the Bluetooth unit 4 5 6 7 4 Connects/disconnects
  • Kenwood DNX5140 | Instruction Manual - Page 83
    unit. 1 Display the Software Information screen Touch Menu" screen (page 60). in the "Setup 1 2 3 4 1 Displays the software keycode. 2 Displays the software version. 3 Displays the Bluetooth firmware version. 4 Uses for Bluetooth firmware update. (DNX6140/DNX6000EX/DDX5034BT only) English 83
  • Kenwood DNX5140 | Instruction Manual - Page 84
    can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored. 1 Display the Setup Memory screen Touch Menu" memorized settings. 6 Returns to "Setup Memory" screen. 84 DNX6140/DNX6000EX/DNX5140/DDX514/DDX5034/DDX5034BT
  • Kenwood DNX5140 | Instruction Manual - Page 85
    English 85
  • Kenwood DNX5140 | Instruction Manual - Page 86
    balance. 4 Adjusts the front and rear volume balance. 5 Turns the Loudness control function On or Off. If turned "ON", high and low tones are selected Audio Control screen. 7 8 9 7 Returns to the "Audio Control 1" screen. 8 Adjusts the subwoofer volume. 86 DNX6140/DNX6000EX/DNX5140/DDX514/
  • Kenwood DNX5140 | Instruction Manual - Page 87
    loud. Equalizer Control You can set up the equalizer. 1 Display Equalizer Control Touch in the "Audio Control Menu" screen "User" ⁄ • "User" can be selected after tone adjustment is carried out. See (page 88). 2 Selects items to be adjusted for tone curve setup. If turned "
  • Kenwood DNX5140 | Instruction Manual - Page 88
    Setup> (page 60) and (page 87) are not available. - When "DVD" or "USB" is selected as the front source, the rear source can be selected from "Front" (same source as front), "iPod" or "VIDEO", etc. When the rear source is 88 DNX6140/DNX6000EX/DNX5140/DDX514/DDX5034/DDX5034BT
  • Kenwood DNX5140 | Instruction Manual - Page 89
    set to "Front", "DVD" or "USB", the same source screen or control screen is displayed in the rear monitor. See (page 66). English 89
  • Kenwood DNX5140 | Instruction Manual - Page 90
    such instances, replace the both batteries with new ones. Not used ⁄ • The position of the remote control mode switch is indicated in the title of each mode, e.g., "(AUD mode)". • When controlling a player that is not integrated in the unit, select "AUD" mode. 90 DNX6140/DNX6000EX/DNX5140/DDX514
  • Kenwood DNX5140 | Instruction Manual - Page 91
    volume control Adjusts volume at rear when the Dual Zone function is ON.  1 1 4GHI Y 2ABC  5JKL 3 DEF 6MNO 7 8 9 PQRS TUV WXYZ 2 ZONE  R.VOL  0 CLEAR DIRECT AT T V.SEL Switches to the navigation screen. DISP SRC V.SEL MODE FNC/PBC TOP MENU MENU DVD SETUP RETURN AUDIO SUBTITLE
  • Kenwood DNX5140 | Instruction Manual - Page 92
    Remote Controller O O O O DVD/VCD/CD/Audio files (DVD mode DVD SETUP RETURN AUDIO SUBTITLE ANGLE ZOOM   ENTER O AUD• DVD DVD SETUP RETURN AUDIO SUBTITLE ANGLE ZOOM   ENTER O AUD• DVD DVD DVD Top Menu Returns to the DVD top menu. DISP SRC V.SEL MODE FNC/PBC TOP MENU MENU DVD
  • Kenwood DNX5140 | Instruction Manual - Page 93
    Displays the DVD menu. Turns the playback control on or off while playing VCD. DISP SRC V.SEL MODE FNC/PBC TOP MENU MENU DVD SETUP RETURN AUDIO SUBTITLE ANGLE ZOOM   SUBTITLE Switches the subtitle language. DISP SRC V.SEL MODE FNC/PBC TOP MENU MENU DVD SETUP RETURN AUDIO SUBTITLE
  • Kenwood DNX5140 | Instruction Manual - Page 94
    DVD Language Codes Code Language aa Afar ab Abkhazian af Afrikaans am Amharic ar Arabic as Kinyarwanda sa Sanskrit sd Sindhi sg Sangho sh Serbo-Croatian 94 DNX6140/DNX6000EX/DNX5140/DDX514/DDX5034/DDX5034BT Language Singhalese Slovak Slovenian Samoan Shona Somali Albanian
  • Kenwood DNX5140 | Instruction Manual - Page 95
    English 95
  • Kenwood DNX5140 | Instruction Manual - Page 96
    another media. Navigation ? The touch panel control of the navigation system does not work. ✔ Navigation software is not the latest version. ☞ Update the navigation software. For how to update the software, refer to the instruction manual of the navigation unit. 96 DNX6140/DNX6000EX/DNX5140/DDX514
  • Kenwood DNX5140 | Instruction Manual - Page 97
    English 97
  • Kenwood DNX5140 | Instruction Manual - Page 98
    connected to this unit> (page 7). Update your iPod: The iPod's software is an older version which the unit can not support. ➡ Confirm that the software for the iPod is the latest version. See (page 7). 98 DNX6140/DNX6000EX/DNX5140/DDX514/DDX5034/DDX5034BT
  • Kenwood DNX5140 | Instruction Manual - Page 99
    can receive signal. Updating Firmware: Updating the firmware of Sirius tuner. ➡ Operation is invalid until the update is completed. Updating Channels **% Completed: Updating the Sirius Channel Map. ➡ Operation is invalid until the update is completed. Subscription Updated: Updating the suscription
  • Kenwood DNX5140 | Instruction Manual - Page 100
    Drive System : TFT active matrix system Number of Pixels : 336,960 (480H x 234V x RGB) Effective Pixels : 99.99 % Pixel Arrangement : RGB striped arrangement Back Lighting : Cold Cathode Fluorescent Tube USB Standard : USB DVD-Video 96 kHz) Dynamic Range : 98 dB (DVD-Video 96 kHz) Disc Format : DVD-
  • Kenwood DNX5140 | Instruction Manual - Page 101
    ), AVRCP (Audio/Video Remote Control Profile), OPP (Object Push Profile), PBAP (Phonebook Access Profile), SYNC (Synchronization Profile) Navigation section (DNX6140/DNX6000EX/DNX5140 only) Receiver : High-sensitivity GPS receiver Reception Frequency : 1575.42 MHz (C/A code) Acquisition Times Cold
  • Kenwood DNX5140 | Instruction Manual - Page 102
    Bluetooth SIG, Inc. and any use of such marks by Kenwood Corporation is under license. Other trademarks and trade names are those of their respective owners means that an electronic accessory has been designed to a trademark of DVD Format/Logo Licensing DNX6000EX/DNX5140/DDX514/DDX5034/DDX5034BT
  • Kenwood DNX5140 | Instruction Manual - Page 103
    manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part by turning the equipment off and on, the user is encouraged
  • Kenwood DNX5140 | Instruction Manual - Page 104
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
GPS NAVIGATION SYSTEM
DNX6140/6000EX
DNX5140
MONITOR WITH DVD RECEIVER
DDX514
DDX5034/BT
INSTRUCTION MANUAL
©
B64-4254-00/00 (KW/K2W/RW)
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new GPS Navigation System/DVD Receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided
below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model DNX6140/6000EX/5140/ DDX514/5034/5034BT
Serial number
US Residence Only
Register Online
Register your Kenwood product at
www.Kenwoodusa.com