Kenwood DNX5140 Instruction Manual - Page 88
Tone Setup, Zone Control
UPC - 019048181411
View all Kenwood DNX5140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Audio Control Tone Setup You can set a Tone curve. 1 Display the Tone screen Zone Control You can set the front and rear audio source. 1 Display Zone Control Touch in the "Audio Control Menu" screen (page 86). 1 See (page 87). 2 Set the Tone 1 2 5 3 6 4 7 8 9 1 Tone curve becomes flat. 2 Bass adjustment items are displayed. 3 Middle adjustment items are displayed. 4 Treble adjustment items are displayed. 5 Sets the Center frequency. 6 Sets the level. 7 Sets the Q factor. (Only Bass and Middle can be set) 8 Bass DC Extend settings (Only when Bass is selected) If turned "ON", it extends the bass center frequency to the low register by approximately 20%. 9 Returns to the "Equalizer" screen. 1 Displays the current source. 2 Set the Zone Control 2 3 3 4 2 Turns the Zone Function (that sets different source sounds for front and rear speakers) On or Off. 3 Sets the front and rear audio source separately. (This button appears when the Zone function is On.) ⁄ • When the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source. 4 Adjusts the volume of the rear channel. (This button appears when the Zone function is On.) ⁄ • There are following limitations when zone function is set to "On". - There is no output from the subwoofer. - (page 60) and (page 87) are not available. - When "DVD" or "USB" is selected as the front source, the rear source can be selected from "Front" (same source as front), "iPod" or "VIDEO", etc. When the rear source is 88 DNX6140/DNX6000EX/DNX5140/DDX514/DDX5034/DDX5034BT