Kenwood KDC-BT952HD Instruction Manual

Kenwood KDC-BT952HD Manual

Kenwood KDC-BT952HD manual table of contents:

  • Kenwood KDC-BT952HD | Instruction Manual - Page 1
    KDC-X996 KDC-BT952HD INSTRUCTION MANUAL CD-RECEIVER Before reading this manual, click the ...the latest edition and the modified pages. http://manual.kenwood.com/edition/im350/ Check the latest edition ...or service on the product. Model KDC-X996/ KDC-BT952HD Serial number US Residents Only Register ...
  • Kenwood KDC-BT952HD | Instruction Manual - Page 2
    ... Equalizer Control Dual Zone System 45 Bluetooth Audio Operation 29 Basic operations Play mode DSP Setup 31 Car Type Selection Speaker ... Connecting Wires to Terminals Installing/Removing the unit Troubleshooting Guide 82 83 84 86 Specifications 89 3 | KDC-X996/ KDC-BT952HD English | 4
  • Kenwood KDC-BT952HD | Instruction Manual - Page 3
    ... does not operate normally after a while, consult your Kenwood dealer. Handling CDs This unit is initially set on the Demonstration mode. When using this ... or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters. 5 | KDC-X996/ KDC-BT952HD English | 6
  • Kenwood KDC-BT952HD | Instruction Manual - Page 4
    ... button). 10 [ 38 ] button To start or interrupt playback for CD, audio file, and iPod (press the button). 11 [ ] button To select ... Turning the [VOL] knob adjusts the sound volume. ⁄ • You cannot set the item with the " " icon displayed. 7 | ... Play Mode KDC-X996/ KDC-BT952HD English | 8
  • Kenwood KDC-BT952HD | Instruction Manual - Page 5
    ... when it conforms to the iPod control function. • When "APP & iPod Mode". is set to "ON", this unit can control only the Pause and play, Selecting a song, and Fast Forward or Fast Backward of the Song functions. Press the [MENU] button. KDC-X996/ KDC-BT952HD 9 | English | 10
  • Kenwood KDC-BT952HD | Instruction Manual - Page 6
    ... " * " in the first character position. • If the first character string begins with an article "a", "an", or "the" in the Direct Search mode, it is searched for in defiance of the article. 11 | KDC-X996/ KDC-BT952HD English | 12
  • Kenwood KDC-BT952HD | Instruction Manual - Page 7
    iPod/iPhone Operation Skip Search You can scroll up or down according to the number of the selected Search items so that you can quickly ... Press the [DISP] button for at least 1 second. ⁄ • Set the ratio with "Skip Search" in (page 10). 13 | KDC-X996/ KDC-BT952HD English | 14
  • Kenwood KDC-BT952HD | Instruction Manual - Page 8
    ... to register your cell-phone before using it with this unit. (page 27) • Disconnect the iPhone or iPod touch. • Speakers from which audio... for at least 1 second, and then press it again briefly. Press the [MENU] button. 15 | KDC-X996/ KDC-BT952HD English | 16
  • Kenwood KDC-BT952HD | Instruction Manual - Page 9
    ... effective only for the files registered in the database created with KENWOOD Music Editor. ⁄ • No sound is output while playing audio file. Press the [MENU] ... it when the desired item is displayed. 6 Exit Play Mode 17 | KDC-X996/ KDC-BT952HD English | 18
  • Kenwood KDC-BT952HD | Instruction Manual - Page 10
    ... 1 second. ⁄ • This operation is effective only for the files registered in the database created with KENWOOD Music Editor. • Set the ratio with "Skip Search" in (page 18). 19 | KDC-X996/ KDC-BT952HD English | 20
  • Kenwood KDC-BT952HD | Instruction Manual - Page 11
    ... as Random play and Repeat play. Function of remote control ⁄ • No sound is output while playing audio file. Direct Music Search Searching the music by...VOL] knob. Press the [MENU] button. Song Select Press the [4] or [¢] button. 6 Exit Play Mode 21 | KDC-X996/ KDC-BT952HD English | 22
  • Kenwood KDC-BT952HD | Instruction Manual - Page 12
    ... Preset Memory mode Press the [MENU] button. 3 Turn the [VOL] knob and press it when the desired ... band you wish to store in the preset memory Turn the [VOL] knob and press it when the desired ... item is displayed. Select "Settings" > "Auto Memory". Turn the [VOL] knob and press it when the desired ...
  • Kenwood KDC-BT952HD | Instruction Manual - Page 13
    ...in (page 24). 4 Enter the frequency or Channel Press button [9], [2], [1] [8], [1], [0] 5 Tune in to the entered frequency or Channel Press the [4] or [¢] button. 25 | KDC-X996/ KDC-BT952HD English | 26
  • Kenwood KDC-BT952HD | Instruction Manual - Page 14
    .... By operating the Bluetooth device, register the hands-free unit or audio unit (pairing). Select "KENWOOD BT CD/R-6P1" from the list of found units....Turn the [VOL] knob. 4 Delete the selected Bluetooth device Press the [VOL] knob for at least 2 seconds. 27 | KDC-X996/ KDC-BT952HD English | 28
  • Kenwood KDC-BT952HD | Instruction Manual - Page 15
    .... • Speakers from which audio is output change depending on the Bluetooth setting "Bluetooth HF/Audio". The default is Front. Refer to (page 55) 29 | KDC-X996/ KDC-BT952HD English | 30
  • Kenwood KDC-BT952HD | Instruction Manual - Page 16
    ... the [VOL] knob. ⁄ • The following operations disconnect the line: - Insert a CD. - Connect a USB device. • The name of the calling party is displayed if it... the preset dial number. Refer to (page 34). 31 | KDC-X996/ KDC-BT952HD English | 32
  • Kenwood KDC-BT952HD | Instruction Manual - Page 17
    ..., and the missed call list are the lists of calls originated from and received at this unit. They are not the ones stored in the cell-phone memory. Exit the Preset... "OTHER Information General Home Office Mobile Other ⁄ • You can input max 32 digits. 33 | KDC-X996/ KDC-BT952HD English | 34
  • Kenwood KDC-BT952HD | Instruction Manual - Page 18
    ... Selection> (page 39) "DISP & ILLUMI If this unit is not operated at least 5 seconds OFF" with "DISP" selected, the display turns off. During a setup mode, the display ...Once"/ "OFF" "BT DVC Status" You can display the connection status. Cell-phone/ BT Audio 35 | KDC-X996/ KDC-BT952HD English | 36
  • Kenwood KDC-BT952HD | Instruction Manual - Page 19
    ... then press the [VOL] knob. Press the [MENU] button for at least 1 second, and then press it again briefly. KDC-X996/ KDC-BT952HD 5 Make a setting 6 Exit Menu List mode ⁄ • If the selected display item does not have any information, alternative information...
  • Kenwood KDC-BT952HD | Instruction Manual - Page 20
    ... the color from "Variable Scan"/ "Color1" - "Color 24"/ "User". Creating "User" color You can create your original color during the..."Color24." The color you created can be called when you select "User". 1. Press the [VOL] knob for at least 1 second. Enter the detail color adjustment mode. 2. Turn the...
  • Kenwood KDC-BT952HD | Instruction Manual - Page 21
    ... Date setting items 5 Exit Menu List mode Turn the [VOL] knob and press it when the desired item is... Radio Data System station time data and this unit's clock. "OFF"/ "ON" "Summer Time" Advances the ...page 39). For time zone list, see (page 79). 41 | KDC-X996/ KDC-BT952HD English | 42
  • Kenwood KDC-BT952HD | Instruction Manual - Page 22
    ..."/ "ON" Updates the firmware. The update information will be posted on the following URL as necessary. www.kenwood.com/cs/ce/ ( : Factory setting) Theft ... the built-in amplifier improves the quality of the sound from Preout. "OFF"/ "ON" KDC-X996/ KDC-BT952HD 2 Enter Demonstration mode setting 3 ...
  • Kenwood KDC-BT952HD | Instruction Manual - Page 23
    ... - "0" - "R15" (Right) (Rear) "R15" - "0" - "F15" (Front)*2 ( : Factory setting) *1 Function of KDC-X996 *2 This setting cannot be made when "2 Zone" (... effective for the HD Radio source. 5 Exit Audio Control mode ⁄ • You can select for each source. 45 | KDC-X996/ KDC-BT952HD English | 46
  • Kenwood KDC-BT952HD | Instruction Manual - Page 24
    ..., press the [VOL] knob. Press the [VOL] knob. KDC-BT952HD Band Item "BAND1" (62.5 Hz) "GAIN" Band level "B.Ex" Bass ... Audio Control mode 3 Enter Manual Equalizer Control mode Turn the [VOL] knob and ... displayed. 4 Select the setting item to adjust 47 | KDC-X996/ KDC-BT952HD English | 48
  • Kenwood KDC-BT952HD | Instruction Manual - Page 25
    ... "7inch", "4x6", "5x7", "6x8", "6x9", "7x10" KDC-BT952HD: "Small", "Medium", "Large" "LOCATION" Speaker... "7inch", "4x6", "5x7", "6x8", "6x9", "7x10" KDC-BT952HD: "None", "Small", "Medium", "Large" "... "None", "6 1/2inch", "8inch", "10inch", "12inch", "15inch Over" KDC-BT952HD: "None", "Small", "Large" ...
  • Kenwood KDC-BT952HD | Instruction Manual - Page 26
    ... +2.3 feet +0 feet SUB-W 2 Enter Audio Control mode 3 Enter Manual position setting mode Turn the [VOL] knob and press it when the desired item is ...and then press the [VOL] knob. Press the [MENU] button for at least 1 second. 6 Exit Audio Control mode 51 | KDC-X996/ KDC-BT952HD English | 52
  • Kenwood KDC-BT952HD | Instruction Manual - Page 27
    ... the source 1 Setup Sound Control Refer to the following operations to setup the Sound Control. - Manual Equalizer Control (page 47) - Car Type Selection (... cannot be registered when the iPod Equalizer set in (page 46). 53 | KDC-X996/ KDC-BT952HD English | 54
  • Kenwood KDC-BT952HD | Instruction Manual - Page 28
    ...Displaying the Firmware Version) Display the version of the firmware of this unit. For how to update the firmware, access our web site. http://www.kenwood.com/cs/ce/bt/... value, and then press the [VOL] knob. Press the [ ] button. 5 Exit BT Settings mode 55 | KDC-X996/ KDC-BT952HD English | 56
  • Kenwood KDC-BT952HD | Instruction Manual - Page 29
    ... desired item is displayed. Select the digit. 2. Turn the [VOL] knob to select the numbers, and then press the [VOL] knob. KDC-X996/ KDC-BT952HD 2 Enter Bluetooth device registration mode 1. Select Special device registration mode Turn the [VOL] knob and press ...
  • Kenwood KDC-BT952HD | Instruction Manual - Page 30
    ... display, your cell-phone may not support automatic download of phone book data. In this case, try downloading manually. 3 Select the Bluetooth device ... on the type of characters.) • To cancel downloading of the phone book data, operate the cell-phone. 59 | KDC-X996/ KDC-BT952HD English | 60
  • Kenwood KDC-BT952HD | Instruction Manual - Page 31
    ...the phone book, you can reply to it in the same manner as you selected "Manual". • "Send Error" is displayed in case of failure in transmission of the ... still displayed on the display, selecting "YES" resends the reply. Selecting "NO" cancels the reply. 61 | KDC-X996/ KDC-BT952HD English | 62
  • Kenwood KDC-BT952HD | Instruction Manual - Page 32
    ... to select "YES", and then press the [VOL] knob. Selecting "NO" cancels the SMS manual reply. Turn the [VOL] knob and press it when the desired item ... the [38] button allows you to preview the message. Pressing the [38] button again determines the message. 63 | KDC-X996/ KDC-BT952HD English | 64
  • Kenwood KDC-BT952HD | Instruction Manual - Page 33
    ...Exit Menu List mode ⁄ • Only the channel number is stored. Category information is not stored.... the tuning mode of the radio. "Channel": Normal manual seeking control. "Preset": Search in order ... fails, "No Signal" appears. • When "Subscription Updated" is displayed, press [VOL] knob to turn ...
  • Kenwood KDC-BT952HD | Instruction Manual - Page 34
    ... Tuning You can search for a channel directly by entering its number. Content alert When the broadcast of the song by the registered artist or ... the [DIRECT] button on the remote control. "- - - -" is displayed. Press the number buttons. Press the [4] or [¢] button. Registering contents 3 Enter ...
  • Kenwood KDC-BT952HD | Instruction Manual - Page 35
    .... Select "Settings" > "Parental Lock". Operation type Selection of numbers. Operation Turn the [VOL] knob and press the [VOL] knob. 1...a passcode input screen appears. Programs on the selected channel can be received only when the input passcode is correct. 69 | KDC-X996/ KDC-BT952HD English | 70
  • Kenwood KDC-BT952HD | Instruction Manual - Page 36
    ...a tag is stored. When your iPod is connected to this unit, "TAG Transferred" is shown on the display and a tag is sent to the iPod. Turn the [VOL] knob and ... on the selected channel can be received only when the passcode is correct. 8 Exit Menu List mode 71 | KDC-X996/ KDC-BT952HD English | 72
  • Kenwood KDC-BT952HD | Instruction Manual - Page 37
    ... 1 6 10 18 Press button [1], [ENT] [6], [ENT] [1], [0], [ENT] [1], [8], [ENT] In USB/Music CD/Audio file source • Music select: [ 4 Fast Forwards or Fast ... ready to use. Dispose of used batteries promptly. If swallowed, contact a physician immediately. English | 73 | KDC-X996/ KDC-BT952HD 74
  • Kenwood KDC-BT952HD | Instruction Manual - Page 38
    ...(.mp3), WMA (.wma) • Playable disc media CD-R/RW/ROM • Playable disc file ...device file system FAT16, FAT32 Although the audio files are complied with the standards listed above,...types or conditions of media or device. • Playing order of the Audio file In the example of folder/file tree ...
  • Kenwood KDC-BT952HD | Instruction Manual - Page 39
    ..."Beep" "Menu Language" "Pandora source" "Built in AUX" "Forced CD-DA" "Built in AMP" "DSI" "F/W Update" Function items appearing when the SiriusXM tuner source is... Lock" "Signal Level" "Buffer Usage" "TAG Memory" "Tagging" "Clock & Date" - "DISP & ILLUMI" - English | 77 | KDC-X996/ KDC-BT952HD 78
  • Kenwood KDC-BT952HD | Instruction Manual - Page 40
    ... labels on, or inside the product relating to laser product safety. JVC KENWOOD Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI, TOKYO, JAPAN THIS ... contains Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate 79 | KDC-X996/ KDC-BT952HD English | 80
  • Kenwood KDC-BT952HD | Instruction Manual - Page 41
    ... console has a lid, make sure to install the unit so that the faceplate will not hit the lid .... and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks ... in the following 5 Connect the wiring harness connector to the unit. 6 Install the unit in your car. 7 Reconnect ...
  • Kenwood KDC-BT952HD | Instruction Manual - Page 42
    ... pole type antenna. (Max. 300mA, 12V) To connect the Kenwood navigation system, consult your navigation manual. ø5mm Blue (Antenna control wire) ANT. CONT...fuse) 5 Pull the unit all the way out with your hands, being careful not to drop it. - + Battery 83 | KDC-X996/ KDC-BT952HD English | 84
  • Kenwood KDC-BT952HD | Instruction Manual - Page 43
    ... misoperation or miswiring. Before calling service, first check the following table for possible problems. ? No sound is heard from the rear ....  The preout jack is being used.  The Touch Sensor Tone cannot be output from the preout jack. 85 | KDC-X996/ KDC-BT952HD English | 86
  • Kenwood KDC-BT952HD | Instruction Manual - Page 44
    ... on again. If this message still appears, press the reset button on the control unit. Update of the Bluetooth firmware has failed. Retry it. The Bluetooth device ... Radio tags is full. No Tag Function: iPod which does not support the tag Memory is connected. 87 | KDC-X996/ KDC-BT952HD English | 88
  • Kenwood KDC-BT952HD | Instruction Manual - Page 45
    ...BAND13 (16 kHz): ±9 dB Tone action (KDC-BT952HD) BAND1 (62.5 Hz): ±9 dB ...Total harmonic distortion (1 kHz) KDC-X996: 0.008 % KDC-BT952HD: 0.010 % Signal to Noise ...KDC-X996: 110 dB KDC-BT952HD: 105 dB Dynamic range : 93 dB... subject to change without notice. 89 | KDC-X996/ KDC-BT952HD English | 90...



Type your new search above

The manual viewer requires the flash plugin to be installed and enabled.
To view this page ensure that Adobe Flash Player version 10 or greater is installed.

Kenwood KDC-BT952HD Manual