Kenwood TH-D75 User Manual - Page 64
POSITION COMMENT, STATUS TEXT, Selecting a Position Comment, Storing Status Text
View all Kenwood TH-D75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
POSITION COMMENT The APRS data which you transmit always includes one of the 15 predetermined position comments. Select an appropriate comment depending on your situation. Selecting a Position Comment 1 Access Menu No. 502. STATUS TEXT Status text is another comment to transmit with position data. Unlike a position comment, you can make any desired comment using a maximum of 42 alphanumeric characters. This transceiver has 5 memory channels for preprogramming. Storing Status Text 1 Access Menu 503. The selectable comments are listed below: [Off Duty], [Enroute], [In Service], [Returning], [Committed], [Special], [PRIORITY], [CUSTOM 0 ~ CUSTOM 6], or [EMERGENCY!] • If you select [EMERGENCY!], a confirmation message appears. Press [A/B] again. 2 Select a status text number. • Press [A/B] to mark the currently used status text with < >. 3 Select the proportion of times to transmit the status text when the APRS beacon is transmitted. You can select [Off] or [1/1] ~ [1/8]. ATTENTION ¡ When it is unnecessary, never select [EMERGENCY!]. When an emergency signal is received using APRS, the Emergency Alarm on all stations will sound. • 1/X means the status text will be transmitted X number of times. 4 Enter your status text. Setting the Data Band Frequency Set the data band frequency to the APRS network frequency. The default setting of the data band is band A. You can change the data band to band B by Menu No. 506. Note: ¡ The APRS network frequency will depend on what region of the world you are operating as follows: North America: 144.390 MHz, Europe: 144.800 MHz Australia: 145.175 MHz, New Zealand: 144.575 MHz Argentina: 144.930 MHz, Brazil: 145.570 MHz Japan: 144.640 MHz (9600 bps)/ 144.660 MHz (1200 bps) 14-3