Kenwood TH-D75 User Manual - Page 94
CHECKING THE CALLSIGN SETTING, Setting by Local CQ, Setting by Individual, Setting by Call History
View all Kenwood TH-D75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Setting by Local CQ 1 Press and hold [ ]. The destination selection screen appears. This screen also appears when selecting [Destination Select] in the Digital Function Menu. 2 Select [Local CQ] and press [ENT]. CQCQCQ is set to [TO]. Setting by Gateway CQ 1 Press and hold [ ]. The destination selection screen appears. This screen also appears when selecting [Destination Select] in the Digital Function Menu. 2 Select [Gateway CQ] and press [ENT]. The repeater list selection screen appears. 3 Select the destination repeater and press [ENT]. The repeater is set to [TO]. Setting by Individual 1 Press and hold [ ]. The destination selection screen appears. This screen also appears when selecting [Destination Select] in the Digital Function Menu. 2 Select [Individual] and press [ENT]. The Callsign list appears. 3 Select the Callsign and press [ENT]. The selected Callsign is set to [TO]. Setting by Reflector 1 Press and hold [ ]. The destination selection screen appears. This screen also appears when selecting [Destination Select] in the Digital Function Menu. 2 Select [Reflector] and press [ENT]. The Reflector menu item appears. 3 Select the following items and press [ENT]. [Use Reflector]: If your repeater is currently linked to a reflector, select [Use Reflector] and press [ENT]. [CQCQCQ] is set to [TO]. Then press [PTT] to transmit your digital voice signal to the reflector. [Link to Reflector]: If you want to link the repeater to a reflector, or you want to change to another reflector, select [Link to Reflector] and press [ENT]. Input the reflector's type (REF/DCS/XRF/XLX), number (000 to ZZZ) and module (A to Z), and press [ENT]. A link command (example: [REF030CL]) is set to [TO]. Then press [PTT] to link the repeater to the reflector. Up to 5 reflectors you linked before are shown when you select [Link to Reflector] again. [Unlink Reflector]: If you want to link the repeater to another reflector, be sure to unlink currently linked reflector. Select [Unlink Reflector] and press [ENT]. [_______U] is set to [TO]. Then press [PTT] to unlink the repeater from the reflector. [Echo Test]: You can verify how well your digital voice signal is getting into the system. Select [Echo Test] and press [ENT]. Then [_______E] is set to [TO]. Then press [PTT] to transmit your digital voice signal to the system. After releasing [PTT], echo back will be sent back from the repeater. [Reflector Info.]: You can send the reflector information command. Select [Reflector Info.] and press [ENT]. Then [_______I] is set to [TO]. Then press [PTT] to transmit the reflector information command. After releasing [PTT], ID will be sent from the repeater. Note: ¡ To use a hotspot (simplex DV access point), you can store the hotspot's frequency and other information in the Hotspot List (Menu No.230) for using the DR mode Reflector menu above. Please refer to page No.16-16 "HOTSPOT LIST" for details. Setting by Call History 1 Press and hold [ ]. The destination selection screen appears. This screen also appears when selecting [Destination Select] in the Digital Function Menu. 2 Select [Call History] and press [ENT]. The Callsign list appears. 3 Select the destination Callsign and press [ENT]. The selected Callsign is set to [TO]. Setting by Direct Input (URCALL) 1 Press and hold [ ]. The destination selection screen appears. This screen also appears when selecting [Destination Select] in the Digital Function Menu. 2 Select [Direct Input(URCALL)] and press [ENT]. The direct input screen appears. 3 Enter the destination Callsign and press [ENT]. The destination Callsign is set to [TO]. Note: ¡ When entering the destination Callsign by direct input (URCALL), the route setting is not automatically set. Please be sure to set the route setting by [Route Select] in the Digital Function Menu then. Setting EMR 1 Press and hold [ ]. The destination selection screen appears. This screen also appears when selecting [Destination Select] in the Digital Function Menu. 2 Select [EMR] and press [ENT]. The EMR is set. CHECKING THE CALLSIGN SETTING You can check transmission settings of DV/DR mode before transmission. 1 Select [CS Setting] in the Digital Function Menu. The confirmation screen appears. 2 Press [A/B]. Each press switches between name display and Callsign display. 16-8