Kenwood TH-D75 User Manual - Page 88
DIGITAL FUNCTION MENU, SIMPLEX CALL, How to Use the Digital Function Menu
View all Kenwood TH-D75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
DIGITAL FUNCTION MENU This menu switches the functions to use for operation in digital mode. How to Use the Digital Function Menu 1 Press [MODE] to enter DR mode. 2 Press [F], [MODE]. The Digital Function Menu appears. (DV mode) (DR Mode) 3 Select an item in the Digital Function Menu and press [A/B]. The setting menu for the selected item appears. For the detailed setting procedures, refer to the pages for each function. Note: ¡ If you select [DV/DR Select] or [Data Mode], the setting is changed and return to the previous screen. The following table shows the items in the Digital Function Menu in DV mode and DR mode. The items are different in DV mode and DR mode. DR mode 1 Destination Select 2 Route Select 3 Repeater Detail 4 CS Setting 5 DV/DR Select 6 Data Mode 7 TX History 8 DR Scan 9 Auto Reply DV mode 1 Destination Select 4 CS Setting 5 DV/DR Select 6 Data Mode 7 TX History 9 Auto Reply SIMPLEX CALL Simplex call can be used for direct communication between a pair of transceivers without using a repeater. Simplex call can be operated only in DV mode. Example: Outputting CQ at 446.100 MHz 1 Set the frequency to 446.100 MHz with [ ]/[ ] or [ENC] control. 2 Press [MODE] to enter DR mode. When the mode is already DV mode, move to step 4. 3 Switch to DV mode in the Digital Function Menu. 4 Select [Destination Select] in the Digital Function Menu. The destination selection screen appears. 5 Select [Local CQ] and press [ENT]. [CQCQCQ] is set to [TO]. 6 Press [PTT] to transmit. Note: ¡ Receive at the frequency at which you will attempt to transmit and check that there will be no interference with other stations. ¡ When you set DV mode for the first time, [CQCQCQ] is set to [TO]. ¡ Simplex call in digital mode can be operated only in DV mode. 16-2