KitchenAid KUID508HPS Installation Instructions - Page 6
Preparing the Bottom Hinges, Crush Hazard
View all KitchenAid KUID508HPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
8. Unscrew the door hinge screws completely from top and bottom hinges and place them aside. 11. Remove the screw cap cover and replace on the other side. 9. Remove the door and place it aside. Swap the hinge screws to the opposite side. Preparing the Bottom Hinges 1. Unscrew and remove the grill cover using a Torx T20 screwdriver. Place them aside. A 10. Remove the screws and hinges from the cabinet with the Torx T25 screwdriver and place them aside. A. Grill cover screws 2. Remove the screw cover and place it on the other side as shown in the illustration. WARNING 3. Reinstall the grill cover. Crush Hazard Articulated hinges are self closing and many pinch points exist prior to cabinet installation. Do not operate, or close, the hinges while they are removed from the ice maker. Failure to follow these instructions can result in crush, cut, or pinch injuries. †Torx,T20 and T25 are trademarks of Acument Intellectual Properties, LLC. 6