Konica Minolta bizhub 283 bizhub 423/363/283/223 Enlarge Display Operations Us - Page 41
General fax/scan operation, Reset, Start
View all Konica Minolta bizhub 283 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
4.1 General fax/scan operation 4 4 Configure the scan settings as needed. % For details on the scan settings, refer to page 4-9. % To cancel the settings, press the Reset key, and then configure the settings again. 5 Press the Start key. The original is scanned and the data is sent. % To temporarily stop the scan operation, press the Stop key. Reference - Some settings cannot be combined with each other. If they are combined improperly, the settings will be given priorities in either of the two ways described below. - The setting configured last is given priority. (The setting configured first is canceled.) - The setting configured first is given priority. (A warning message appears.) - If an original with copy guard patterns embedded is scanned, the scan operation is stopped and the job is discarded. - If an original with a password embedded by the password copy function is scanned, the data is sent after you enter the password. - If multiple originals with different passwords are scanned at the same time, you will need to enter a password for each original. bizhub 423/363/283/223 4-3