Konica Minolta bizhub C220 Administration Guide - Page 31
Using Dynamic Mode
View all Konica Minolta bizhub C220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
4. Using the Universal Print Driver 4.2 Using Dynamic Mode This section describes how to print in Dynamic Mode. In Dynamic Mode, you can select devices using one of three methods: Network Search, Manual Connection, and History. Dynamic Mode is not available to restricted users (e.g. with "User" privileges). Network Search Use Network Search to search for devices on the network, and select one of the matching devices that are found. The procedure for using Network Search is as follows. 1. From the Windows Printers folder, right click on the "KONICA MINOLTA Universal PCL(PS)" icon, and select Print Setup. 2. The KONICA MINOLTA Universal Printer Driver Device Selector opens. 3. Select "Network Search" from the pull-down list at the top of the Device Selector dialog box. Note: If there is no history data such as when you first open the Device Selector, "Network Search" will be selected automatically by default. Figure 4-2-1 Network Search Selection 4. The Device Selector starts to search the network for devices. Note: Click Cancel at the bottom of the dialog box below to cancel the search. Figure 4-2-2 Searching Dialog Box 27