Konica Minolta bizhub C220 Administration Guide - Page 42
Table 4-2-6 Option Dialog Box Settings
View all Konica Minolta bizhub C220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
4. Using the Universal Print Driver Note, however, that the queue level will always be displayed as "unknown" for third-party devices. The number in parentheses in the text to the right of the icon shows the number of currently queued jobs. The status information of these devices is updated every 10 seconds. Options The Option dialog box below enables you to set the Device Selector options and check the version. To display this dialog, click Details on the Device Selector dialog box to display the expanded view (Figure 4-2-10 Sample Expanded View), and then click Option in the lower right of that dialog box. Figure 4-2-12 Option Dialog Box The settings available from this dialog box are described below. Table 4-2-6 Option Dialog Box Settings Setting When selecting this Universal Printer Driver from an application, it will be connected to the printer last used. The Device selection dialog will not be displayed. Port settings for Network Search Auto Port Search Select Searching Port Version Information Description When KONICA MINOLTA Universal Printer Driver is started with this checkbox is selected, the last child driver to be used will be opened, rather than the Device Selector. However, the Device Selector dialog box will open if a child driver has never been used. Set the port number to use for network searches. Change this setting only when you cannot perform searches normally. Search for the port automatically. This setting is used by default. Set the port number. The default is 35. 1 to 65535 can be entered. Click Version Information to view the KONICA MINOLTA Universal Printer Driver Version Information dialog box (Figure 4-4-1 Version Information Dialog Box). 38