Konica Minolta bizhub C220 Administration Guide - Page 41
Status Icon Specification
View all Konica Minolta bizhub C220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
4. Using the Universal Print Driver NOTE: If you specify a subnet other than that of the PC/server on which UPD is installed under "Subnet Settings," then a Broadcast request may not be able to pass through the router, depending on the router's configuration. If this happens, you can perform the search by changing the "Search Method" to Unicast. Status Icon Specification In the Network Search and History views, the "Status(Number of Jobs Waiting)" column shows icons indicating the device status and the length of the job queue. Each details is described below. • Device Status IconThis icon indicates whether a warning or error has occurred on the device. To see details about a warning or error, use the Printer Information described below, or check the device directly. Table 4-2-4A Device Status Icons Device Status Icon Ready Warning Unavailable Unknown Description The device has no warnings or errors, and is ready to print. There is a warning on the device, such as low toner or paper. Print is possible. The device is unable to print, due to a device error, running out of paper, etc. The device status could not be acquired. • Job Queue Icon This icon indicates the number of standby jobs on the device's queue. Table 4-2-5 Job Queue Icons Congestion Queued Jobs Icon High 10+ Medium 2-9 Low 1 No Jobs in Queue 0 Unknown Unknown 37