Konica Minolta bizhub C220 Administration Guide - Page 35
IP Address/Host Name
View all Konica Minolta bizhub C220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
4. Using the Universal Print Driver 3. Select "Manual Connection" from the pull-down list at the top of the Device Selector dialog box. Figure 4-2-6 Example of Manual Connection View 4. Select the child driver to use from the list on the left of the dialog box. 5. Specify the connection in the right-hand side of the dialog box. There are three ways to specify the connection, as shown below. • IP Address/Host Name You can specify the connection by entering the IPv4 address, IPv6 address, or host name directly. Fully Qualified Domain Names (FQDN) cannot be used, and up to 48 characters can be entered. • PortSpecify the output device by the port registered with the operating system. • Shared Printer Specify the output device by entering the path to a shared printer (e.g. "//server/printer"). Up to 239 characters can be entered. You can also click Browse to specify it while browsing for a shared printer. Note: The Browse button is not supported in Windows 7 (Server 2008 R2) and later operating systems. 31