Home » Konica Minolta Manuals » Multifunction Devices » Konica Minolta bizhub C258 » Manual Viewer

Konica Minolta bizhub C258 bizhub C368/C308/C258 Security Operations User Manu - Page 22

Terminating a Session and Logging out, Authentication error during external server authentication - default admin password

View all Konica Minolta bizhub C258 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

1.4 Miscellaneous 1 Terminating a Session and Logging out The machine allows the operator to automatically log out from or terminate a session, if it is unable to detect an operation on the control panel or a communication packet on the network. Additionally, if a user changes the user password on the control panel while the same user accessing the machine via Web Connection, the session of Web Connection is terminated. The following shows the setting range and the default setting of each function. Set the time according to the environment in which the machine is used. The administrator should explain to the user that the following settings are made. The administrator should also explain to the user immediately as soon as the setting has been changed. Function name/software, etc System Auto Reset Auto Logout (Web Connection) Data Administrator Description Setting range • [1] to [9] minutes, Default setting: [1] minute Setting procedure • [Utility] - [Administrator Settings] - [System Settings] - [Reset Set- tings] - [System Auto Reset] Setting range • [Admin. Mode Logout Time]: [1] to [60] minutes Default setting: [10] minutes • [User Mode Logout Time]: [1] to [60] minutes Default setting: [60] minutes Setting procedure • Start the Web Connection and, in the Administrator Mode, select [Security] - [Auto Logout]. Default setting: [60] minutes (No change can be made in the setting) The time setting represents consideration for the time-consuming task, such as downloading the registered information. Be careful about leaving your seat, because the time setting is rather long. Authentication error during external server authentication If a user is unable to log in successfully during user authentication using the external server authentication, possible causes include the status of connection to the external server, the condition of the external server (the server is down), and the status of user registration with the external server such as the number of users to be controlled by the machine reaching its limit and the user password quality on the external server. The administrator should check these points and make the appropriate settings. bizhub C368/C308/C258 1-18

Section	Page
Contents	2
1 Security	6
1.1 Introduction	6
Administrators	6
Compliance with the ISO15408 Standard	6
Operating Precautions	6
INSTALLATION CHECKLIST	8
1.2 Security Functions	11
Check Count Clear Conditions	11
1.3 Precautions for Operation Control	13
Roles of the Owner of the Machine	13
Roles and Requirements of the Administrator of the machine	13
Password Usage Requirements	13
External authentication server control requirements	14
Security function operation setting operating requirements	14
Operation and control of the machine	14
Machine Maintenance Control	16
Precautions for using the printer driver	16
1.4 Miscellaneous	17
Password Rules	17
Precautions for Use of Various Types of Applications	18
Encrypting communications	18
Print functions	18
IPP printing	19
Items of Data Cleared by Overwrite All Data Function	19
Fax functions	20
USB keyboard	20
Different types of boxes	20
Hardware and software used in the machine	21
Firmware integrity verification function	21
IPsec setting	21
CS Remote Care function	21
Terminating a Session and Logging out	22
Authentication error during external server authentication	22
2 Administrator Operations	24
2.1 Accessing the Administrator Mode	24
2.1.1 Accessing the Administrator Mode	24
2.1.2 Accessing the User Mode	30
2.2 Enhancing the Security Function	34
2.2.1 Items cleared by HDD Format	36
2.2.2 Setting the Password Rules	37
2.2.3 Setting the Enhanced Security Mode	39
2.3 Protecting Machine from Illegal Firmware Update	42
Setting the FW Update (USB) Password	42
2.4 Preventing Unauthorized Access	43
Setting Prohibited Functions When Authentication Error	43
2.5 Canceling the Operation Prohibited State	45
Performing Release Setting	45
2.6 Setting the Authentication Method	47
2.6.1 Setting the Authentication Method	47
2.6.2 Setting the External Server	50
2.7 ID & Print Setting Function	53
Setting ID & Print	53
2.8 System Auto Reset Function	55
Setting the System Auto Reset function	55
2.9 User Setting Function	57
Making user setting	58
2.10 Account Track Setting Function	63
Making account setting	63
2.11 User Box Function	68
2.11.1 Setting the User Box	68
2.11.2 Changing the user/account attributes and box password	73
2.11.3 Setting Memory RX	78
2.12 Changing the Administrator Password	81
Changing the Administrator Password	81
2.13 Protecting Data in the HDD	84
2.13.1 Setting the Encryption Key (encryption word)	84
2.13.2 Changing the Encryption Key	88
2.13.3 Setting the Overwrite HDD Data	90
2.14 Overwrite All Data Function	92
Setting the Overwrite All Data function	92
2.15 Obtaining Job Log	95
2.15.1 Obtaining and deleting a Job Log	95
2.15.2 Downloading the Job Log data	97
Job Log data	99
2.16 Setting time/date in machine	106
2.16.1 Setting time/date	106
2.16.2 Setting daylight saving time	109
2.17 SSL Setting Function	111
2.17.1 Device Certificate Setting	111
2.17.2 SSL Setting	113
2.17.3 Removing a Certificate	114
2.18 TCP/IP Setting Function	115
2.18.1 Setting the IP Address	115
2.18.2 Registering the DNS Server	116
2.19 AppleTalk Setting Function	117
Making the AppleTalk Setting	117
2.20 E-Mail Setting Function	118
Setting the SMTP Server (E-Mail Server)	118
3 User Operations	120
3.1 User Authentication Function	120
3.1.1 Performing user authentication	120
3.1.2 Accessing the ID & Print Document	124
3.2 Change Password Function	126
Performing Change Password	126
3.3 Secure Print Function	129
Accessing the Secure Print Document	129
3.4 User Box Function	132
3.4.1 Setting the User Box	132
3.4.2 Changing the user/account attributes and box password	137
3.4.3 Accessing the User Box and User Box file	143
4 Application Software	148
4.1 Data Administrator	148
4.1.1 Accessing from Data Administrator	148
4.1.2 Setting the user authentication method	151
4.1.3 Changing the authentication mode	152
4.1.4 Making the user settings	154
4.1.5 Making the account settings	155
4.1.6 DNS Server Setting Function	156
4.1.7 AppleTalk Setting Function	157

Match case Limit results 1 per page

bizhub C368/C308/C258

1-18

1.4

Miscellaneous

Terminating a Session and Logging out

The machine allows the operator to automatically log out from or terminate a session, if it is unable to detect

an operation on the control panel or a communication packet on the network. Additionally, if a user changes

the user password on the control panel while the same user accessing the machine via

Web Connection

the session of

Web Connection

is terminated.

The following shows the setting range and the default setting of each function. Set the time according to the

environment in which the machine is used.

The administrator should explain to the user that the following settings are made. The administrator should

also explain to the user immediately as soon as the setting has been changed.

Authentication error during external server authentication

If a user is unable to log in successfully during user authentication using the external server authentication,

possible causes include the status of connection to the external server, the condition of the external server

(the server is down), and the status of user registration with the external server such as the number of users

to be controlled by the machine reaching its limit and the user password quality on the external server.

The administrator should check these points and make the appropriate settings.

Function name/software, etc

Description

System Auto Reset

Setting range

•

[1] to [9] minutes, Default setting: [1] minute

Setting procedure

•

[Utility] - [Administrator Settings] - [System Settings] - [Reset Set-

tings] - [System Auto Reset]

Auto Logout

(

Web Connection

)

Setting range

•

[Admin. Mode Logout Time]: [1] to [60] minutes

Default setting: [10] minutes

•

[User Mode Logout Time]: [1] to [60] minutes

Default setting: [60] minutes

Setting procedure

•

Start the

Web Connection

and, in the Administrator Mode, select

[Security] - [Auto Logout].

Data Administrator

Default setting: [60] minutes (No change can be made in the setting)

The time setting represents consideration for the time-consuming

task, such as downloading the registered information. Be careful

about leaving your seat, because the time setting is rather long.