Konica Minolta bizhub C258 bizhub C368/C308/C258 Security Operations User Manu - Page 55
System Auto Reset Function
View all Konica Minolta bizhub C258 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
2.8 System Auto Reset Function 2 2.8 System Auto Reset Function When a log-on to the Administrator Mode becomes successful, the machine enables setting of the operation of the System Auto Reset function. If no operations are performed for a predetermined period of time during access to the Administrator Mode or user mode (during setting of User Authentication) from the control panel, the System Auto Reset function automatically causes the user to log off from the mode. The predetermined period of time, after which the System Auto Reset function is activated, can be selected from among nine values between 1 min. and 9 min. System Auto Reset can also be set to [OFF]. If no operations are performed for 1 min. even with System Auto Reset set to [OFF], the function causes the user to log off from the mode automatically. Tips Processing of a specific job, however, takes precedence over the System Auto Reset function. That is, even if a predetermined period of time elapses during which no operations are performed, once the processing of the specific job has been started, the System Auto Reset function does not cause the user to log off from the mode. The user logs off from the mode after the lapse of a predetermined period of time after the processing of the specific job is completed. Setting the System Auto Reset function 0 For the procedure to call the Administrator Mode on the display, see page 2-2. 0 Do not leave the machine with the setting screen of Administrator Mode left shown on the display. If it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Mode. 1 Call the Administrator Mode on the display from the control panel. 2 Touch [System Settings]. 3 Touch [Reset Settings]. bizhub C368/C308/C258 2-33