Konica Minolta bizhub C550 bizhub C550 Network Fax Operations User Manual - Page 124
is not divided if [Print Separate Fax s] is [ON] and [TX/RX Set
View all Konica Minolta bizhub C550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Reception 3 ! Detail If the actual paper for printing is smaller than the paper determined in Step 1, the fax is reduced and then printed. If the [Print Separate Fax Pages] is [OFF] and the orientation of the actual paper for printing and the orientation of the paper determined in Step 1 is different, it is automatically rotated 90º and then printed. For details on [Print Separate Fax Pages], refer to "Settings of transmission and reception mode (TX/RX Settings)" on page 9-79. When faxes with varying sizes are to be printed, the processing is carried out one by one for each page. When the paper sizes determined in Step 1 and Step 2 are set for multiple trays, the paper tray is selected according to the settings specified in the [Auto Tray Selection Settings]. For details on the [Auto Tray Selection Settings], refer to the User's Guide [Copy Operations]. When the required paper size is set for manual tray only, then it is printed from manual paper feed tray. However, when manual tray is not set to [Auto Tray Select] in "Auto Tray Selection Settings", paper is not fed from the manual tray. Page is not divided if [Print Separate Fax Pages] is [ON] and [TX/RX Settings] of the Utility mode is set as follows. • Tray is set to [Tray Selection for RX Print] • When [Min. Reduction for RX Print] is set to [Full Size] • When [Print Paper Selection] is set to [Fixed Size] or [Priority Size] • When [Duplex Print (RX)] is [ON] When a fax is received in color mode, [Print Separate Fax Pages] cannot be used. Moreover, [Tray Selection for RX Print] is fixed to [Auto] and [Print Paper Selection] is fixed to [Auto Select]. When a printable paper is not loaded, message is displayed for loading the paper. • When [Print Paper Selection] is set to [Priority Size], A4, B4 or A3 is selected as the appropriate paper size. When such sizes do not exist, printing is done by selecting the normal paper size. • When [Print Paper Selection] is set to [Fixed Size], A4, B4 or A3 is selected as the appropriate paper size. When such sizes do not exist, message is displayed till the paper is loaded. C550 3-13