Konica Minolta bizhub PRESS C71hc bizhub PRESS C1060/C1070/C1070P/PRO C1060L D - Page 26

Start, control panel

Get Konica Minolta bizhub PRESS C71hc PDF manuals and user guides View all Konica Minolta bizhub PRESS C71hc manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

11 Press [a] to [d] of each point, and enter the adjustment value using the keypad, [,], or [+] on the screen. 12 When entry processing is completed, press [Adjustment Start]. The input adjustment value is reflected to the "Zoom" value and the "Image Shift" value at the [Back] screen. When [User Setting] - [Common Setting] - [Back Side Magnification Adjustment] - is configured to [OFF], the adjustment value is not reflected to [Horizontal] at the [Back] screen. 13 Press Start on the control panel. A test chart is printed out. NOTICE Output about 3 charts. 14 Check the gap of the printing position referring to the charts that are output as the second and third sheet. Repeat steps 10 to 13 until all gaps between the front and back sides are cleared. 2-15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
2-15
11
Press [a] to [d] of each point, and enter
the adjustment value using the keypad,
[
,
], or [
+
] on the screen.
12
When entry processing is completed,
press [Adjustment Start].
The input adjustment value is reflected to the
"Zoom" value and the "Image Shift" value at the
[Back] screen.
When [User Setting] - [Common Setting] - [Back
Side Magnification Adjustment] - is configured to
[OFF], the adjustment value is not reflected to
[Horizontal] at the [Back] screen.
13
Press
Start
on the
control panel
.
A test chart is printed out.
NOTICE
Output about 3 charts.
14
Check the gap of the printing position referring to the charts that are output as the
second and third sheet.
Repeat steps 10 to 13 until all gaps between the front and back sides are cleared.