Konica Minolta bizhub PRESS C71hc bizhub PRESS C1060/C1070/C1070P/PRO C1060L D - Page 69
bizhub PRESS C1070/C1070P/C1060, FD-5BT, i1Pro/i1Pro2
View all Konica Minolta bizhub PRESS C71hc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
bizhub PRESS C1070/C1070P/C1060 13 When the following message is displayed, place the instrument flat on the calibration dock and click [OK]. For FD-5BT, click [OK] while you press down the FD-5BT. 14 Stack 10 sheets of blank paper whose type is the same as that of the paper where chart has been printed, and place the printed chart on top of it. 15 When the following message is displayed, click [OK]. 16 Carry out the measurement in sequence from row A. - Hold down the side button of i1Pro/i1Pro2 or FD-5BT. When "bleep" sounds, slide i1Pro/i1Pro2 or FD-5BT while holding down the side button. Slide the spectrophotometer to the opposite side, then release the side button. - For details about how to use i1Pro/i1Pro2 or FD-5BT, refer to the manual supplied with the spectrophotometer. 3 Tips For FD-5BT, use the FD-5BT after you release the lock lever of the target mask and remove the target mask. 3-37