Konica Minolta bizhub PRESS C71hc bizhub PRESS C1070/C1070P/C1060/C71hc/bizhub - Page 20
Power-saving function, OFF is enabled. To enable either function
View all Konica Minolta bizhub PRESS C71hc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
1.1 Turning the Power ON/OFF )Power-saving function Using the following functions can reduce the power consumption of this machine and provide greater power-saving effects. Function Power Save function Auto Low Power Auto Shut OFF ErP Setting Monochrome Energy-save Mode Weekly Timer Description Turns off the touch panel display to reduce the power consumption of this machine. This machine is placed into the Auto Low Power mode when: • The specified period of time has elapsed with no print jobs exe- cuted in the printable state • Power Save on the control panel has been pressed for a sec- ond or more This mode is available when [Auto Low Power] is selected by selecting Utility/Counter - [Administrator Setting] - [System Setting] [Power Save Setting] - [Power Save Function Setting]. There are eight power-saving time periods available: 5 min., 10 min., 15 min., 30 min., 60 min., 90 min., 120 min. and 240 min., from which you can select the desired one. Power-saving time periods, 90 min., 120 min., and 240 min., may not be displayed depending on regions. Turns off all LEDs except Power Save LED and Power LED on the control panel, to reduce the power consumption of this machine. This machine is placed into the Auto Shut OFF mode when: • The specified period of time has elapsed with no print jobs exe- cuted in the printable state • Power Save on the control panel has been pressed for a sec- ond or more If the Auto Shut OFF mode is kept for a long time, it may take a while to warm up this machine upon restart. This mode is available when [Auto Shut OFF] is selected by selecting Utility/Counter - [Administrator Setting] - [System Setting] - [Power Save Setting] - [Power Save Function Setting]. There are seven power-saving time periods available: 0 min., 1 min., 30 min., 60 min., 90 min., 120 min., and 240 min., from which you can select the desired one. Turns the main power off after the Auto Low Power mode, Auto Shut OFF mode, or the sub power switch is kept in the off state for the specified period of time. There are seven power-saving time periods available: Do Not Switch, 12 Hours, 24 Hours, 36 Hours, 48 Hours, 60 Hours, and 72 Hours, from which you can select the desired one. If the Weekly Timer is set to [Weekly Timer ON], [ErP Setting] appears dimmed and you cannot configure this setting. For monochrome printing, you can carry out it in energy-save mode. Automatically turns the power of this machine on or off based on the specified time or day of the week. Tips - Utility/Counter - [Administrator Setting] - [System Setting] - [Power Save Setting] - [Power Save Function Setting] is the same as Utility/Counter - [User Setting] - [System Setting] - [Power Save Setting] - [Power Save Function Setting], use either of the methods to configure a setting. - If Power Save on the control panel is pressed for one second or more, either of Auto Low Power or Auto Shut OFF is enabled. To enable either function, select [Administrator Setting] - [System Setting] - [Power Save Setting] - [Power Save Function Setting]. Reference For details about how to configure and use the above functions, refer to the HTML User's Guide. NOTICE NOTICE If this machine is turned off because the Weekly Timer has started, job data is not received even if it is sent. While this machine can be used normally, send job data again. 1-8