Konica Minolta bizhub PRESS C71hc bizhub PRESS C1070/C1070P/C1060/C71hc/bizhub - Page 50

Loading paper into the Paper Feeder Unit PF-602m, Pull out the tray to load paper into.

Get Konica Minolta bizhub PRESS C71hc PDF manuals and user guides View all Konica Minolta bizhub PRESS C71hc manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

4.1 Loading Paper Loading paper into the Paper Feeder Unit PF-602m The following describes how to load paper into an optional Paper Feeder Unit PF-602m. The same paper loading procedure is used for Tray 3 and Tray 4. Reference For information about how to load paper into other optional paper feeder unit, refer to the HTML User's Guide. " Pull out the tray to load paper into. NOTICE NOTICE Trays can be pulled out only when this machine is turned on. Before pulling out the target tray, check that the sub power switch is turned on. In order to prevent the machine from falling down, only one tray can be pulled out at a time. # Turn the side guide lock knobs (4 pieces) counterclockwise to loosen them. $ While pressing the side guide lock release lever ( ), slide the side guide plates to any positions ( ). Determine their locations based on the size indicator of the bottom plate of the tray. NOTICE NOTICE To slide the side guide plates, be sure to hold both side guide plates together. If you move it by holding only either of the side guide plate, the side guide plate that held may become displaced. % While pressing the rear guide lock release lever, slide the rear guide plate to any positions. Determine their locations based on the size indicator of the bottom plate of the tray. & To fix the side guide plates at the correct locations, load an appropriate amount of paper into the tray while aligning it to the left-hand side of the tray. NOTICE NOTICE Load paper with the print side facing up. ' Press the side guide plates against paper, then turn the side guide lock knobs (4 pieces) clockwise to fix them. 4-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
4-3
4.1
Loading Paper
Loading paper into the Paper Feeder Unit PF-602m
The following describes how to load paper into an optional
Paper Feeder Unit PF-602m
. The same paper loading
procedure is used for
Tray 3
and
Tray 4
.
Reference
For information about how to load paper into other optional paper feeder unit, refer to the
HTML User's Guide
.
A
Pull out the tray to load paper into.
NOTICE
NOTICE
Trays can be pulled out only when this machine is turned on. Before
pulling out the target tray, check that the
sub power switch
is turned
on.
In order to prevent the machine from falling down, only one tray can
be pulled out at a time.
B
Turn the
side
guide lock knobs
(4 pieces)
counterclockwise to loosen them.
C
While pressing the
side guide lock release lever
(
), slide the
side guide plates
to any positions
(
).
Determine their locations based on the size indicator of the
bottom plate of the tray.
NOTICE
NOTICE
To slide the
side guide plates
, be sure to hold both
side guide
plates
together. If you move it by holding only either of the
side guide
plate
, the
side guide plate
that held may become displaced.
D
While pressing the
rear guide lock release lever
,
slide the
rear guide plate
to any positions.
Determine their locations based on the size indicator of the
bottom plate of the tray.
E
To fix the
side guide plates
at the correct locations, load an appropriate amount of
paper into the tray while aligning it to the left-hand side of the tray.
NOTICE
NOTICE
Load paper with the print side facing up.
F
Press the
side guide plates
against paper, then turn the
side
guide lock knobs
(4
pieces) clockwise to fix them.