Konica Minolta bizhub PRESS C71hc bizhub PRESS C1070/C1070P/C1060/C71hc/bizhub - Page 66
Press [Start] on the [Scan Adjustment Chart] screen
View all Konica Minolta bizhub PRESS C71hc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
5.1 Both Sides Adjustment / Press [Start] on the [Scan Adjustment Chart] screen. The adjustment chart is scanned. When scanning is properly completed, the counter of [Number of Scanning] on the Scan Adjustment Chart screen is added by one, and the blue frame displayed in the illustration on the screen shifts to the next one on the right side. - If you move the adjustment chart before the blue frame shifts to the next, the measurement may not be performed properly. - If the ADF is open, scanning fails, and a message is displayed. Close the ADF, then press [Close] in the message dialog box. - If scanning fails, a message may be displayed. Follow the on-screen instructions to correctly place the adjustment chart and background sheet, then press [Close]. - If you press [Return] on the Scan Adjustment Chart screen during scan measurement, a message is displayed to confirm whether to interrupt the scan measurement. To discard the previous measurement result, press [Yes]. Retry the scanning process from the first scan measurement. When continuing scan measurement, press [No]. 5-7