Konica Minolta fi-7180 fi-5900C Operations Guide - Page 197
Speficy the detection area., Middle, Right, Document
View all Konica Minolta fi-7180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
3. Speficy the detection area. Specified area: Specify the area to be detected. Select left, middle, or right. Left Middle Right 35 35 35 8 Feeding direction SCANNER SETTINGS Document 60 60 Unit: mm Selected mode: You can specify the mode to detect or not to detect the specified area for multifeed. Specify non-detection area: The specified area is not detected. Specify detection area: The specified area is detected. Start: You can specify the starting position of the selected range by the length from the edge of the paper document. Range: 0 to 510mm, in increments of 2mm, Start position
177
8.4 Multifeed Detection
8
SCANNER SETTINGS
3.
Speficy the detection area.
Specified area:
Specify the area to be detected. Select left, middle, or right.
Selected mode:
You can specify the mode to detect or not to detect the specified area for
multifeed.
Specify non-detection area:
The specified area is not detected.
Specify detection area:
The specified area is detected.
Start:
You can specify the starting position of the selected range by the length
from the edge of the paper document.
Range: 0 to 510mm, in increments of 2mm, Start position<End position
End:
You can specify the ending position of the selected range by the length
from the edge of the paper document.
Range: 0 to 510mm, in increments of 2mm, Start position<End position
35
35
35
60
60
Feeding direction
Left
Middle
Right
Document
Unit: mm