Konica Minolta fi-7180 fi-5900C Operations Guide - Page 199
Edge Filler (ADF
View all Konica Minolta fi-7180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
8.5 Page Edge Filler (ADF) Depending on the state of the documents, the shadow of the scanned document appears in the end portion of the output image and black thin lines may be generated. If this is the case, you can improve the output image by using the "Page Edge Filler" function. This function fills the end portion of the image so that it looks clean. Configure the settings for the Page Edge Filler as follows: 1. Start up the Software Operation Panel. 8 Refer to "8.1 Scanner Settings" on page 166. 2. Select the "Page Edge Filler (ADF)" setting on the [Device Setting 2] tab. SCANNER SETTINGS 3. Specify the length for each end section; top, bottom, right, and left, to fill the end sections. T T : Top edge = 0 ~ 15 mm D : Bottom edge = -7 ~ 7 mm R : Right edge = 0 ~ 15 mm L Generated R L : Left edge = 0 ~ 15 mm image (c an b e set in increments of 1mm) Filled area D The specified areas are filled with white when the backing (background) is white, and with black when the backing is black. 8.5 Page Edge Filler (ADF) 179