Konica Minolta fi-7180 fi-5900C Operations Guide - Page 61

2.13 How to use the Scanner Driver To scan the documents, a scanner driver and the application software that supports the driver are required. There are two drivers; "FUJITSU TWAIN32 Scanner Driver" in compliance with the TWAIN regulation and "FUJITSU ISIS Scanner Driver" in compliance with the ISIS regulation, come with fi-5900C. This section explains how to use each driver using the attached application. ■ FUJITSU TWAIN32 Scanner Driver FUJITSU TWAIN32 Scanner Driver is designed for scanning documents with FUJITSU image scanner fi series by using application software that complies with the TWAIN standard. 2 The following describes the procedure with examples of ScandAll 21 for ordinary scanning by using this driver software. ● Procedure for Basic Scanning Operation 1. Start up the application. From the [Start] menu, select [Programs]-[Scanner Utility for Microsoft Window] and click [ScandAll 21]. 2. Select your scanner on the window below. Select [Select Source] from the [Scan] menu. BASIC SCANNER OPERATIONS 3. Select the scanner to use, then click the [Select] button. Select •[FUJITSU Fi-5900Cd] for FUJITSU TWAIN32 V9 or •[FUJITSU TWAIN32] for FUJITSU TWAIN32 V8 then click the [Select] button. 4. Load the documents on the scanner. For details on loading documents, refer to "2.6 Loading Documents on the Hopper" on page 217. 2.13 How to use the Scanner Driver 41