Konica Minolta fi-7180 fi-5900C Operations Guide - Page 223
SCANNER SPECIFICATIONS, 7.2 Document Quality on Maxi
View all Konica Minolta fi-7180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 223 highlights
(*1) For details, refer to "7.2 Document Quality" on page 153. (*2) The scanning speed is the maximum speed of the scanner hardware. The actual speed may be slower due to the system overhead such as data transfer time. (*3) With JPEG compression enabled (*4) The maximum capacity varies depending on the document thickness. Refer to"7.3 Maximum Document Loading Capacity" on page 156 . (*5) The SCSI and USB interface cannot be used together. (*6) When using USB 2.0, you have to use a port compatible to USB 2.0. When connecting to USB 1.1, the scanning speed will decrease. (*7) Avoid connecting other SCSI devices to the same bus. It can reduce the scanner throughput. (*8) You can imprint alphabetic characters and number on the scanned document. The fi-590PRF (pre-imprinter) will print prior to scanning on the front side of the document. The fi-590PRB (post-imprinter) will print after the scanning on the back side of the document. You can install both the fi-590PRF and fi-590PRB, but you cannot use them at the same time. 10 SCANNER SPECIFICATIONS 10.1 Basic Product Specifications 203