Konica Minolta fi-7180 fi-5900C Operations Guide - Page 211
Jam Detection Outside of Scannable Area When Transporting
View all Konica Minolta fi-7180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 211 highlights
8.15 Jam Detection Outside of Scannable Area When Transporting... If this function is turned On, such a case, in which the documents are fed outside of the scannable area due to over-skew, is judged as a jam. You can turn it On and Off. Configure the settings for the Jam detection outside of scannable area when transporting... as follows: 1. Start up the Software Operation Panel. 8 Refer to "8.1 Scanner Settings" on page 166. 2. Select the "Jam detection outside of scannable area when transporting..." setting on the [Device Setting 2] tab. SCANNER SETTINGS 3. Select "On" to judge such a scan as a jam, and select "Off" not to judge it as a jam. 8.15 Jam Detection Outside of Scannable Area When Transporting... 191
191
8.15 Jam Detection Outside of Scannable Area When Transporting...
8
SCANNER SETTINGS
8.15 Jam Detection Outside of Scannable
Area When Transporting...
If this function is turned On, such a case, in which the documents are fed outside of the scannable area due
to over-skew, is judged as a jam. You can turn it On and Off.
Configure the settings for the Jam detection outside of scannable area when transporting... as follows:
1.
Start up the Software Operation Panel.
Refer to
“8.1 Scanner Settings” on page 166
.
2.
Select the “Jam detection outside of scannable area when transporting...”
setting on the [Device Setting 2] tab.
3.
Select “On” to judge such a scan as a jam, and select “Off” not to judge it
as a jam.