Konica Minolta magicolor 3730DN magicolor 3730DN User Guide - Page 140
INCOR, RECT X T/C, Install a correct KONICA MINOLTA
View all Konica Minolta magicolor 3730DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Symptom Cause Solution Printing takes too much time. The printer is set to a It takes more time to print on special slow printing mode media. When using regular paper, (for example thick make sure that the media type is set stock). properly in the driver. The printer is set to Energy Saver mode. It takes time for printing to start in Energy Saver mode. If you do not want to use this mode, contact Technical Support. The job is very com- Wait. No action needed. plex. A toner cartridge for a Install a correct KONICA MINOLTA different region or an toner cartridge approved for your speunapproved genuine cific printer. toner cartridge is installed (INCOR- RECT X T/C is displayed in the message window). Blank pages One or more of the come out toner cartridges are during print- defective or empty. ing. The wrong media is being used. Check the toner cartridges. The image will not print if one or more cartridges are empty. Check that the media type set in the driver matches the media loaded in the printer. The machine Paper has been does not loaded into Tray 1. enter Energy Saver mode. Remove all paper from Tray 1. Paper cannot be loaded into Tray 1. The machine has entered Energy Saver mode. After the machine is ready for operation, load paper into Tray 1. Solving Other Problems 7-25