Konica Minolta magicolor 3730DN magicolor 3730DN User Guide - Page 48
Thick Stock, Capacity, Tray 1, Manual Feed, Orientation
View all Konica Minolta magicolor 3730DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
- Paper that has been printed on with a heat-transfer printer - Paper that has been printed on with any other printer or fax machine Dusty Wet (or damp) " Keep media between 35% and 85% relative humidity. Toner does not adhere well to moist or wet paper. Layered Adhesive Folded, creased, curled, embossed, warped, or wrinkled Perforated, three-hole punched, or torn Too slick, too coarse, or too textured Different in texture (roughness) on the front and back Too thin or too thick Stuck together with static electricity Composed of foil or gilt; too luminous Heat sensitive or cannot withstand the fusing temperature (180°C [356°F]) Irregularly shaped (not rectangular or not cut at right angles) Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons Acidic Any other media that is not approved Thick Stock Paper thicker than 90 g/m2 is referred to as thick stock. You can print continuously with thick stock. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous printing and print one sheet at a time. Capacity Orientation Tray 1 (Manual Feed Tray) Tray 2 Tray 1 (Manual Feed Tray) Tray 2 1 thick stock sheet. Up to 20 thick stock sheets, depending on their thickness. Face down Face up Media Types 4-5