Kyocera FS-1128MFP FS-1128MFP Fax Operation Guide Rev-3 - Page 72

FAX Operation (Advanced) Manual Reception This method allows you to receive faxes by operating this machine after confirming that the telephone line has connected to the sending system. Connecting a telephone set (commercially available product) to this machine enables you to receive originals after talking to the person at the sending system. NOTE: FAX Automatic Reception has been preset for the receiving mode of this machine. To use Manual Reception, you need to change the receiving mode to Manual Reception. To change to manual mode, refer to Receiving Mode on page 6-9. Receiving after Confirming Connection to the Sending System You can receive originals after confirming by sound that the telephone line has connected to the sending system. 1 When there is an incoming call, the machine makes a ringing tone. 2 Press the FAX key. 3 Press the On Hook key. 4 Press [ManualRX] (the Left Select key). 5 After the sending side has started transmission, the machine starts receiving the originals. Using the Telephone to Receive Use this method when you want to receive originals after talking to the person at the sending system. 1 When there is an incoming call, the telephone connected to the machine makes a ringing tone. 2 Lift the handset of the telephone. 3 Check if the telephone line has connected to the fax of the sending system. When you hear the fax tone The sending system is on fax. 1 Press the Status/Job Cancel key. 2 Press the On Hook key. 3 Press [ManualRX] (the Left Select key). Reception will start. 4-12 OPERATION GUIDE