Kyocera FS-9500DN FS-9100/9500 Operation Guide Rev-1.3 - Page 61
Paper Handling >, >Stitch Adjust >, >>A4/Letter, >Override A4/LT, >Type Adjust
UPC - 632983001073
View all Kyocera FS-9500DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Chapter 3 Using the Operator Panel 1 Press the MENU key. 2 Press the 3 or 4 key repeatedly until Paper Handling > appears. Paper Handling > 3 Press the 2 key. >Stitch Adjust > appears. >Stitch Adjust > 4 Press the 2 key. >>A4/Letter appears. >>A4/Letter 000 5 Press the 3 or 4 key to select A4/Letter, B4 or A3/ Ledger. 6 When the desired paper size is displayed, press the ENTER key. A blinking cursor (_) appears under the value. >>A4/Letter 000 7 Press the 3 or 4 key to increase or decrease, respectively, the value at the blinking cursor. Use the 2 and 1 keys to move the cursor right and left. Definable value: -057 to 057 8 When the desired value is displayed, press the ENTER key. 9 Press the MENU key. The message display returns to Ready. Overriding A4 and Letter Size Difference This selects whether to enable or disable the difference between A4 size and Letter size. Under the default setting of Off, the paper size of the paper source is matched to the paper size formatting the jobs. If these differ, a corresponding error message is displayed. When this is set to On, printing is performed even if the actual paper size differs from the paper size formatting the jobs. 1 Press the MENU key. 2 Press the 3 or 4 key repeatedly until Paper Handling > appears. Paper Handling > 3 Press the 2 key. 4 Press the 3 or 4 key repeatedly until >Override A4/LT appears. >Override A4/LT Off 5 Press the ENTER key. A blinking question mark (?) appears. >Override A4/LT ? Off 6 Select On or Off using the 3 or 4 key. 7 Press the ENTER key. 8 Press the MENU key. The message display returns to Ready. Customizing Paper Type The following describes the procedure used to set a user-defined paper type for the printer. Eight custom user settings may be registered. After having been set, any of these may be called up when setting the paper type for a paper source. The paper weight and duplex path can be set (see Setting the Paper Weight on page 3-46, and Setting the Duplex Path on page 3-46) after selecting the paper type to be customized as follows. For how to reset the customized settings, see Resetting the Type Adjust on page 3-46. 1 Press the MENU key. 2 Press the 3 or 4 key repeatedly until Paper Handling > appears. Paper Handling > 3 Press the 2 key. 4 Press the 3 or 4 key repeatedly until >Type Adjust > appears. >Type Adjust > Custom 1 3-45