Kyocera FS-C2126MFP FS-C2026MFP/C2126MFP Printer Driver User Guide Rev 12.16 - Page 19
Device Options, Setting Device Options, Auto Con Enabling Auto Configuration
View all Kyocera FS-C2126MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Device Settings Device Options Optional devices extend the capabilities of your printing system for source and job storage. In a client/server environment, this feature is unavailable to a client logged in as a restricted user. Setting Device Options You can set the printer driver to match the optional devices installed on your printing system. 1 In the Properties dialog box, click Device Settings. 2 In Device Settings > Device options, select the check boxes for all installed devices. Auto Configure Auto Configure detects the devices installed on the printing system if it is connected over a network. Auto Configure can detect printing system devices such as input devices. When your computer is connected to the printing system through a TCP/IP or WSD port, the Auto Configure button appears in Device Settings. Auto Configure updates the Device options list, Memory, RAM disk and preview images to keep the printer driver consistent with the printing system configuration. Not all installed devices are detected by using Auto Configure. Before selecting OK in Device Settings, check the settings to make sure that they are correct. Note: The default setting for Windows XP Service Pack 2 is for the Windows Firewall to be set to On. The setting can be changed to allow communication between the printing system and your computer. In the Windows Security Alert dialog box, click Unblock. Silent Auto Configuration Silent auto configuration checks the printing system every 10 minutes for changes in optional devices or memory. When a change is detected, the driver is automatically updated with the new settings. Silent auto configuration is only available for printing systems installed in Windows 7 or Windows Vista. In a client/server environment, this feature is unavailable to a client logged in as a restricted user. Enabling Auto Configuration The Auto Configure button can be used to detect all available device options when the printing system is connected to a network through a TCP/IP port. 1 Verify that all optional devices are attached to the printing system, and that it is turned on and ready to print. 2 In Device Settings, click Auto Configure. In Windows XP and Windows 2000, the driver settings are updated immediately. KX DRIVER 2-2