Kyocera FS-C2126MFP FS-C2026MFP/C2126MFP Printer Driver User Guide Rev 12.16 - Page 50
Scaling, Setting Scaling on the Gutter, Creating a Gutter
View all Kyocera FS-C2126MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Layout Scaling Gutter 5 Click OK to return to the Print dialog box. 6 Click OK to start printing. Scaling increases or decreases text and graphics on a page. You can also select a gutter setting that enlarges the margins to accommodate stapling or hole punch. Scaling is not available when Booklet, Poster or Multiple pages per sheet is selected. Setting Scaling on the Page You can increase or decrease text and graphics on a page. 1 In the Layout tab, select Scaling. 2 Type or select a percentage between 20 to 500. Scaling adjusts proportionately the height and width of the page. A lower percentage reduces the page and a higher percentage enlarges the page. 3 Click OK to return to the Print dialog box. 4 Click OK to start printing. A gutter creates additional blank space on the left side and at the top of the sheet. It is often used for binding, hole punch or stapling to make a print job easier to read. Increasing the measurements in Gutter increases the margins around your text and graphics on the left side, or top of the printed sheet. This creates a larger margin space by shifting the printable area to the right, or down as much as one inch (25.4 mm). Creating a Gutter You can increase the margins on the left side and at the top of the printed sheet. 1 In the Layout tab, click Gutter. 2 In the Gutter width options, type a value between 0.20 to 1.00 inches (5.0 to 25.4 mm). Long edge (left) This selection modifies the outside margin on the left-side of the page. Short edge (top) This selection modifies the outside margin on the top-edge of the page. Note: Availability of Gutter settings varies depending on Orientation and Duplex mode settings in the Basic tab. 5-2 User Guide