Kyocera KM-3530 Printing System N Operation Guide (Functions Edition)
Kyocera KM-3530 Manual
View all Kyocera KM-3530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera KM-3530 manual content summary:
- Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 1
1 Printer-related operation I 1. Operation Keys I 2. Procedure for Making Settings I 3. Menu Flow Chart I 4. Selecting the Printer Settings I 5. Options Chapter 2 Software-related operation I 1. Procedure for Installing and Printing with a Printer Driver I 2. Windows KX Driver I 3. Printer Driver - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 2
for the corresponding Printer Drivers. The explanations in this Operation Guide were written with the assumption that the user has a basic understanding of how to work in Microsoft Windows. For further information on using Windows, refer to your Microsoft Windows manual. Trademark Information - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 3
for any damages claimed by you based on any third party claim. This limitation of remedies also applies to any developer of Programs supplied to IBM. IBM's and the developer's limitations of remedies are not cumulative. Such developer is an intended beneficiary of this Section. Some jurisdictions - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 4
in this printer are licensed from the Software will perform in accordance with Agfa Japan-published specifications. Agfa Japan does not warrant that the Software is with the Software and Typefaces is repair or replacement of defective parts, upon their return to Agfa Japan. IN NO EVENT WILL - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 5
Keys Printer key Printer Priority key Printer Priority Fax Priority Auto Selection Touch panel Numeric keys I Basic printer screen Ready e-MPS key* e-MPS Printer Menu key Printer Menu Cancel GO Cancel key GO key * Displayed only when the optional hard disk is installed. Printer key - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 6
Printer key. The machine will switch to the printer mode. 2 Touch the "Printer Menu" or the "e-MPS" key. The [Printer Menu] screen or [e-MPS] screen page 3-1 for a list of the various settings.) 4 Change the corresponding settings as desired. (Refer to "4. Selecting the Printer Settings" on page 4-1 - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 7
3. Menu Flow Chart Printer menu Status Page print out 4-1 Selecting the interface setting 4-3 Selecting 4-4 Stop bit length 4-4 Parity 4-4 Protocol 4-4 Barcode mode ON/OFF 4-4 Selecting the network interface NetWare ON/OFF 4-5 NetWare Frame Type 4-5 TCP/IP ON/OFF 4-5 DHCP ON/ - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 8
Selecting the emulation PCL6 Code set Line Printer Code set IBM Proprinter Code set DIABRO Font selection/settings Internal font setting Selecting the font Courier Letter Gothic Font List print out Optional font setting Selecting the font Font List print out 3-2 4-9 4-9 4-9 4-9 4-9 4-9 4-10 4-10 4- - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 9
mode Paper Feed Source Duplex mode Stack select A4/Letter (8 1/2 x 11) usage ON/OFF RAM disk settings RAM disk ON/OFF Writing data Partition List print out RAM disk size Reading data Reading program data Deleting data Deleting font data Deleting program data Deleting macro data 3-3 4-17 4-17 4-18 - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 10
Reading data Reading program data Deleting data Deleting font data Deleting program data Deleting macro data Memory card settings Writing data Partition List print out Format memory card Reading data Reading font data Reading program data Reading macro data Deleting data Deleting font data Deleting - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 11
Menu Flow Chart ROM (option) settings Partition List print out Reading data Additional settings Form Feed Time Out Resource Protect mode Auto Continue ON/OFF and Recovery Time Service Maintenance menu Service Representative Status Page print out Printer Reset Dump received data 4-44 4-44 4-46 4-46 - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 12
3. Menu Flow Chart e-MPS e-MPS settings Quick copy print out Private print/Stored job print out Virtual Mailbox data print out Virtual Mailbox Data List print out Code Job List print out e-MPS configurations 4-50 4-51 4-52 4-52 4-52 4-53 3-6 - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 13
4-1 Status Page print out Prints out a list of such items as the printer default settings, memory volume, etc. G Accessing the Status Page print out screen Touch the "Print Status Page" key. The [Print Status Page] screen will appear. 1 Status Page print out Touch the "Print" key. The Status Page - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 14
shown in the following chart. For the most efficient use of the printer functions, select the various settings according to your printing needs. Item Available settings 1 Interface selection Parallel, Serial, Network Sets the interface that will be used for printing. The currently selected - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 15
Selecting the Printer Settings G Accessing the Interface settings screen Touch the "Interface" key. The [Interface] screen will appear. 1 Selecting the interface setting Select the desired interface and then touch the "Close" key. Touch the "Detail" key to display the setting screen corresponding to - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 16
/OFF 8. 3 Select the desired setting for each item and then touch the "Close" key. The display will return to the [Serial] screen. G Selecting the network interface 1 Select "Network" and then touch the "Detail" key. The [Network] screen will appear. 2 Use the "L" and "M" cursor keys to select the - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 17
Selecting the Printer Settings 9 NetWare ON/OFF Select "ON" or "OFF", as desired, under the "Netware" setting and then touch the "Close" key. The display will return to the [Network] screen. • When "ON" is selected, the Frame Type settings will be displayed. • To cancel the setting, touch the "Back - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 18
4. Selecting the Printer Settings 3 Use the numeric keys to input the first block IP" setting. 2 Use the "L" and "M" cursor keys to select "Subnet Mask" and then touch the "Change" key. The [Subnet Mask] screen will appear. 3 Enter the Subnet Mask address by following the same procedure as for the IP - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 19
the Printer Settings ^ Ether Talk ON/OFF Select "ON" or "OFF", as desired, and then touch the "Close" key. The display will return to the [Network] screen. • To cancel the setting, touch the "Back" key. & Network Card Status Page print out Select "ON" or "OFF", as desired, and then touch the - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 20
Remarks 1 Selecting the emulation Sets the emulation protocol. PCL6, Line Printer, IBM Proprinter, DIABRO 630, EPSON LQ-850, KPDL, KPDL up emulation mode when the emulation protocol has been set to KPDL (Auto). PCL6, Line Printer, IBM Proprinter, DIABRO 630, EPSON LQ-850, KC-GL 5 KC-GL Page A2, - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 21
Close" key. The display will return to the [Emulation] screen. • To cancel the setting, touch the "Back" key. 3 Select the desired emulation and then touch the "Close" key. The display will return to the [Printer Menu] screen. • To cancel the setting, touch the "Back" key. 2 Code set 1 Select one of - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 22
4. Selecting the Printer Settings 3 KPDL Error Report print out ON/OFF 1 Select one of the following emulation protocols and then touch the "Detail" key. The [KPDL (Auto)] screen will appear. KPDL, KPDL (Auto) 2 Select "ON" or "OFF", as desired, under the KPDL error setting and then touch the "Close - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 23
4. Selecting the Printer Settings 6 KC-GL Pen 1 Use the "L" and "M" cursor keys to select the desired type of pen under the "Pen Adjust" setting and then touch the "Change" key. The setting screen for the pen width will appear. 2 Use the "+" and/or "-" key or the numeric keys to enter the desired - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 24
the desired font. To select a font that is already installed in the printer, enter "I###" (with the desired font ID entered in place of ###). To verify font IDs, print out a Font List by following the procedure in "(18) Font List print out". It is possible to select a font other than those already - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 25
display will return to the [Font] screen. • To cancel the setting, touch the "Back" key. 3 Select "Internal" and then touch the "Close" key. The display will return to the [Printer Menu] screen. • To cancel the setting, touch the "Back" key. 1 Selecting the font 1 Touch the "Font ID" key. The [Font - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 26
display will return to the [Printer Menu] screen. • To cancel the setting, touch the "Back" key. 4 Font List print out Touch the "List of Font" key. The Font List will be printed out. G Optional font setting 1 Touch the "Change Interface" key. The [Interface] screen will appear. 2 Select the desired - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 27
4. Selecting the Printer Settings 1 Selecting a font 1 Touch the "Font ID" key. The [Font ID] screen will appear. 2 Select the font ID by following the same procedure as for the internal fonts. 4 Font List print out Touch the "List of Font" key. The font list will be printed out. 4-15 - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 28
It is possible to perform page settings for the 7 items shown in the following chart. For the most efficient use of the printer functions, select the various settings according to your printing needs. Item Available settings Remarks 1 Number of copies 001 - 999 2 Printing orientation Portrait - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 29
4. Selecting the Printer Settings G Accessing the Page Settings screen Touch the "Page set" key. The [Page set] screen will appear. 1 Number of copies 1 Use the "L" and "M" cursor keys to select "Copies" and then touch the "Change" key. The [Copies] screen will appear. 2 Use the "+" and/or "-" key - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 30
Selecting the Printer Settings 4 Select the desired printing orientation and then touch the "Close" key. The display will return to the [Page set] screen. • To cancel the setting, touch the "Back" key. 3 Printing reduction 1 Use the "L" and "M" cursor keys to select "Zoom" and then touch the "Change - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 31
Selecting the Printer Settings 5 Linefeed (LF) action 1 Use the "L" and "M" cursor keys to select "LF Action" and then touch the "Change" key. The [LF Action] screen will appear. 2 Touch the "Change interface" key. The [Interface] screen will appear. 3 Select the desired interface and then touch the - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 32
4. Selecting the Printer Settings 3 Select the desired interface and then touch the "Close" key. The display will return to the [CR Action] screen. • To cancel the setting, touch the "Back" key. 4 Select the desired carriage-return action and then touch the "Close" key. The display will return to - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 33
in the following chart. For the most efficient use of the printer functions, select the various settings according to your printing needs. smoothing process. OFF, ON 2 EcoPrint ON/OFF OFF, ON Allows printing in a toner-saving mode. Use this mode for test pages, etc., when high printing quality - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 34
4. Selecting the Printer Settings G Accessing the Printing Quality settings screen 1 Touch the "Print Quality" key. The [Print Quality] screen will appear. 2 Use the "L" and "M" cursor keys to select the desired item and then touch the "Change" key. The setting screen for the selected item will - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 35
chart. For the most efficient use of the printer functions, select the various settings according to your printing (8 1/2 x 11) size paper to be utilized as though they were the same size. Available installed. Inner tray, Job separator, Finisher main tray, Finisher sub tray, Mailbox (Face-Up - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 36
4. Selecting the Printer Settings G Accessing the Paper settings screen 1 Touch the "Paper Handling" key. The [Paper Handling] screen will appear. 2 Use the "L" and "M" cursor keys to select the desired item and then touch the "Change" key. The setting screen for the selected item will appear. - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 37
user. Thus, if the size of the RAM disk created is too large, printing speed may actually be decreased or the machine may run out of available memory. WARNING: Resetting the printer or turning the main switch OFF (O) will erase all data written to the RAM Disk. The factory default Write Data List of - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 38
4. Selecting the Printer Settings Item 9 Deleting program data Deletes the selected program data from the RAM disk. 0 Deleting macro data Deletes the selected macro data from the RAM - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 39
from a computer, "Processing" will be displayed in the [Printer Menu] screen. Once the operation is completed, "Waiting" will be displayed. 3 Partition List print out Touch the "List of Partitions" key. A Partition List will be printed out. 4 RAM disk size 1 Touch the "RAM DISK Size" key. 2 Use the - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 40
keys to select the program data that you want to be read. • If you want to return to the [RAM DISK Mode] screen, touch the "Cancel" key. 3 Touch the "Enter" key. The display will return to the basic printer screen and the program data will be read. • "Processing" will be displayed in the basic - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 41
cursor keys to select the font data that you want to delete. • If you want to return to the [RAM DISK Mode] screen, touch the "Cancel" key. 3 Touch the "Delete" key. The display will return to the basic printer screen and the font data will be deleted. • "Processing" will be displayed in the basic - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 42
cursor keys to select the macro data that you want to delete. • If you want to return to the [RAM DISK Mode] screen, touch the "Cancel" key. 3 Touch the "Delete" key. The display will return to the basic printer screen and the macro data will be deleted. • "Processing" will be displayed in the basic - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 43
in the following chart. For the most efficient use of the printer functions, select the various settings according to your printing needs. Item "waiting for data" state until data is sent from the host computer. 2 Partition List print out 3 Format hard disk If "Yes" is selected here, the hard disk - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 44
computer, "Processing" will be displayed in the [Printer Menu] screen. Once the operation is completed, "Waiting" will be displayed. 2 Partition List print out Touch the "List of Partitions" key. A Partition List will be printed out. 3 Format hard disk 1 Touch the "Format" key. • It is only possible - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 45
cursor keys to select the program data that you want to be read. • If you want to return to the [Hard Disk] screen, touch the "Cancel" key. 3 Touch the "Enter" key. The display will return to the basic printer screen and the program data will be read. • "Processing" will be displayed in the basic - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 46
"M" cursor keys to select the font data that you want to delete. • If you want to return to the [Hard Disk] screen, touch the "Cancel" key. 3 Touch the "Delete" key. The display will return to the basic printer screen and the font data will be deleted. • "Processing" will be displayed in the basic - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 47
cursor keys to select the program data that you want to delete. • If you want to return to the [Hard Disk] screen, touch the "Cancel" key. 3 Touch the "Delete" key. The display will return to the basic printer screen and the program data will be deleted. • "Processing" will be displayed in the basic - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 48
until data is sent from the host computer. 2 Partition List print out Available settings Write Data List of Partitions 3 Format memory card If "Yes" is memory card has been inserted. (ALWAYS format the memory card using this printer. If you attempt to format it with another device, it may become - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 49
4. Selecting the Printer Settings Item Available settings Remarks 6 Reading program data Reads the selected program data from the memory card. Select from among the program partition names that - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 50
computer, "Processing" will be displayed in the [Printer Menu] screen. Once the operation is completed, "Waiting" will be displayed. 2 Partition List print out Touch the "List of Partitions" key. A Partition List will be printed out. 3 Format memory card 1 Touch the "Format" key. • ALWAYS format the - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 51
be read. • If you want to return to the [Memory Card] screen, touch the "Cancel" key. 3 Touch the "Enter" key. The display will return to the basic printer screen and the data will be read. • "Processing" will be displayed in the basic printer screen while the data is being read. 5 Reading font data - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 52
cursor keys to select the program data that you want to be read. • If you want to return to the [Memory Card] screen, touch the "Cancel" key. 3 Touch the "Enter" key. The display will return to the basic printer screen and the program data will be read. • "Processing" will be displayed in the basic - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 53
"M" cursor keys to select the font data that you want to delete. • If you want to return to the [Memory Card] screen, touch the "Cancel" key. 3 Touch the "Delete" key. The display will return to the basic printer screen and the font data will be deleted. • "Processing" will be displayed in the basic - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 54
cursor keys to select the macro data that you want to delete. • If you want to return to the [Memory Card] screen, touch the "Cancel" key. 3 Touch the "Delete" key. The display will return to the basic printer screen and the macro data will be deleted. • "Processing" will be displayed in the basic - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 55
2 items shown in the following chart. For the most efficient use of the printer functions, select the various settings according to your printing needs. Item 1 Partition List print out Available settings List of Partitions Remarks 2 Reading data Reads the selected data from ROM (option). Select - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 56
4. Selecting the Printer Settings G Accessing the ROM (option) settings screen Touch the "Option ROM" key. The [Option ROM] screen will appear. 1 Partition List print out Touch the "List of Partitions" key. A Partition List will be printed out. 2 Reading data 1 Touch the "Data" key under the "Read" - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 57
to be touched before maintenance menu used by the service personnel. Print Status Page 5 Printer Reset Resets only the Printer Board without the need to turn off power to the machine. Printer Reset 6 Dump received data Data received by the printer is printed out in hex code for program and file - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 58
4. Selecting the Printer Settings G Accessing the Additional settings screen Touch the "Others" key. The [Others] screen will appear. 1 Form Feed Time Out 1 Use the "L" and "M" cursor keys to select "Form Feed Time Out" and then touch the "Change" key. 2 Use the "+" and/or "-" key to select the - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 59
" key. The display will return to the [Others] screen. • To cancel the setting, touch the "Back" key. 4 Service Maintenance menu 1 Touch the "Service" key. 2 Service Representative Status Page print out Touch the "Print Status Page" key. A Service Representative Status Page will be printed out. 4-47 - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 60
4. Selecting the Printer Settings 5 Printer Reset 1 Touch the "Printer Reset" key. 2 Touch the "Yes" key. The Printer Board will be reset. • If you select "No" here, the display will return to the [Others] screen. 6 Dump received data 1 Touch the "Print HEX-DUMP" key. 2 Touch the "Yes" key. A hex- - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 61
which is designated for the "Virtual Mailbox (VMB)" setting in the printer driver. 4 Virtual Mailbox Data List print out Print out of the Virtual Mailbox List 5 Code Job List print out Print out of the Cod JOB List 6 e-MPS configurations Number of quick copy jobs, The following maximum size - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 62
4. Selecting the Printer Settings G Accessing the e-MPS settings screen Touch the "e-MPS" key. The [e-MPS] screen will appear. 1 Quick copy print out 1 Touch the "Quick Copy" key. 2 Use the "L" and "M" cursor keys to select your user name and then touch the "Next" key. 3 Use the "L" and "M" cursor - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 63
4. Selecting the Printer Settings 2 Private print/Stored job print out 1 Touch the "Private/Stored" key. 2 Use the "L" and "M" cursor keys to select your user name and then touch the "Next" key. 3 Use the "L" and "M" cursor keys to select the desired job. 4 Use the "+" and/or "-" key or the numeric - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 64
has been set for the selected job, the screen for inputting the ID will appear. Enter the appropriate ID. 3 Touch the "GO" key and printing will begin. • If you want to cancel printing, touch the "CANCEL" key. 4 Virtual Mailbox Data List print out Touch the "List of VMB" key. A Virtual Mailbox Data - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 65
4. Selecting the Printer Settings 6 e-MPS configurations 1 Touch the "Configuration" key. 2 Maximum number of quick copy jobs Use the "L" and "M" cursor keys to select "Quick Copy" and then touch the "Change" key. 3 Use the "+" and/or "-" key to select the maximum number of quick copy jobs that can - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 66
e-MPS function. Barcode Reader If the optional barcode reader is installed in this machine, the machine can read barcodes that are in the job list and print the corresponding data that is saved on the hard disk. For detailed information, refer to the Instruction Manual for the Barcode Reader. 5-1 - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 67
with this product. * Each type of printer driver has a version appropriate to a specific model of copy machine. Be sure to choose the driver that is appropriate for your copier. Driver type KX driver Universal driver KPDL2 driver Macintosh PPD file Description Compatible OS By attaching optional - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 68
1. Procedure for Installing and Printing with a Printer Driver 1-2 System Conditions G Windows 95/98 Recommended requirements CD-ROM drive CPU RAM HDD Pentium 90 MHz or more 16 MB or more 10 MB or more 1 drive G Windows NT 4.0 Recommended requirements CD-ROM drive CPU RAM HDD Pentium 90 MHz or - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 69
Network] Click to display the PrintMonitor's installation menu. Follow the instructions displayed on the screen to install the print monitor. I Documentation Click to display the manual (PDF) supplied with the printer driver. To open this PDF manual, Adobe Acrobat Reader (developed to view PDF files - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 70
. If you want to connect them through network, refer to the operation manual of the operating system (OS). * The screens shown in the following explanation are those displayed when installing the printer driver for Windows 95/98. 1 Start Windows. * If any applications are currently running, exit - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 71
Installing and Printing with a Printer Driver 7 Select the driver type. From the list, select the type of driver to be installed, then click Next. * Refer to "1-1 Included printer Drivers" on page 1-1 for information regarding each printer driver. 8 The End User Licence Agreement will be displayed - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 72
list, then click Next. 14 Specify whether this printer is to be used as the default printer. Click Yes if so, or click No if not. 15 The settings you have made so far will appear. If they are correct, click Next. Installation of the printer driver will start. 16 To exit installation, click Finish - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 73
CD-ROM into the CD-ROM drive on your computer. The window shown on the right will appear. 3 Click on [Driver Tools] and then on [Remove Drivers] from the subsequent menu. The [Remove Printer Drivers] dialog box will appear. Select the driver that you want to delete and then click on [Uninstall - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 74
is an example procedure for printing using a printer driver under the conditions and environment noted below. • OS: Windows 98 • Printer driver: KX Driver • Application: Wordpad • Printing conditions: Print and staple If you use a system or driver other than that noted above, use the - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 75
to make and which pages are to be printed. Select this printer in the [Name] field. Click on [Properties]. The Properties window will appear. 9 Click on the [Output] Tab. 10 Perform the following settings in order to staple your printed sets. Select "Finishing Tray" as the "Output to" setting. If - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 76
printer driver. * Depending upon the model of your copier, there may be functions that are not supported or that require optional equipment to be installed. Even if the settings for such functions are performed, they will not be effective. * Refer to the Instruction Manual for Windows regarding - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 77
Windows KX Driver 2-2 Media Tab I Paper Size: Allows you to select a standard size of paper or an envelope size. The following sizes of paper or envelope can be used with this printer want to designate a specific type of paper, select "Auto Media Selection". The factory default setting is "Auto - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 78
2. Windows KX Driver 2-2-1 Custom Paper Size dialog box I Setting a custom paper size Perform the following procedure in order to register a custom size when you want to print onto a - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 79
2. Windows KX Driver 2-3 Layout Tab I selected pages fit onto the single sheet of paper. The factory default setting is "1" (one page to each sheet of paper). Example (duplex) open-face documents. By stacking and folding the finished documents, magazines, pamphlets and the like can be created easily - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 80
Windows KX Driver 2-4 Imaging Tab I Print Quality Selects the quality at which printing will be accomplished. [High Quality Enables printing at the highest quality possible for the printer being used. [Proof Prints at a resolution of 600 dpi. [Draft Saves on toner The factory default for both - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 81
2. Windows KX Driver 2-4-1 Print Quality Settings dialog box I Resolution Specifies the printing upon the emulation protocol being used, the "1200 dpi Fast" setting may not be available. I Kyocera Image Refinement Turning this setting "On" allows the jaggies that appear around the edge of text and - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 82
2. Windows KX Driver 2-5 Prologue/Epilogue Tab I Disable Feature Make sure there is NO check mark in this checkbox if you want to use the printer's data of the file that is selected in the displayed list. I Remove Click on this button when you want to delete the selected file from the list. I Edit - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 83
Windows KX Driver 2-6 Output Tab I Output to: Specifies the location of ejection of printed copies. Selection is possible when the optional output devices are installed. [Printer Default Copies will be ejected into the location that is selected in the "Stack select" setting of the printer "Staple" - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 84
2. Windows KX Driver I Staple Stapling is possible if the optional finisher is installed. * Stapling is only available with 20 ppm copiers. * The following settings are required before stapling is possible: (1) "Device Options" setting in the "Device Settings" Tab • Select [RAM Disk] or [Hard Disk - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 85
2. Windows KX Driver 2-6-1 print data from your PC once. The data is stored on the printer's hard disk and used to make subsequent copies. Storing the print disk speeds up printing, minimizes spooling from the PC and lessens network load and enables the use of Quick Copy and other functions. - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 86
use the optional Barcode Reader or Utility Software to delete unneeded data and specific print job whenever necessary. The factory default setting for the number of print jobs that can be saved on the hard disk of the printer no problems, you can use the e-MPS "Quick Copy" setting on the printer - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 87
2. Windows KX Driver 3 If you selected [Private Print] or [Job Storage], input a password in the [Access Code] field. This password can be any 4-digit number from 0000 to 9999. You will need to input this password from the printer operation panel in order to print out. Even if you selected "Job - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 88
2. Windows KX Driver Selecting a virtual mailbox 4 Place a check in the [Job Storage (e-MPS)] checkbox in Select a mailbox from [Defined Names] list and click on the [OK] button. 7 Select [Application Defined] or [Custom] under [Job Name]. If you selected [Custom], input a user name. 8 Click on the [ - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 89
2. Windows KX Driver I How [Barcode] and make detailed settings in regards to printing using barcodes. When you are finished with making all settings, click on the [OK] button. I Print on first [Job Name]. If you selected [Custom], input a user name. 4 Click on the [OK] button. Barcode printing will now - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 90
2. Windows KX Driver 2-7 Device Settings Tab I Device Options If any optional devices are installed, this setting when the optional Duplex Unit is installed. G Internal Finisher Perform this setting when the optional Finisher is installed. G Job Separator Perform this setting when the optional Job - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 91
in the printer. If you make a mistake in the setting here, it is possible that printing will not be accomplished properly. I RAM Disk Specifies the amount of memory to be used for the RAM disk. This setting will only be available when you have selected "RAM Disk" in the "Device Options" list. I User - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 92
2. Windows KX Driver 2-7-1 User Settings I Identification Register the desired user and/or department name. I Page Description Language The emulation modes that can be used with this product will be displayed in the dropdown list. If multiple modes are displayed, it is possible to select the desired - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 93
utilized software to some extent. A B A: [Install Drivers] Click to start installation of the printer driver. Follow the instructions displayed on the screen to install the printer driver. B: [Documentation] Click to display the manual (PDF file) supplied with the printer driver. To open this PDF - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 94
3. Printer Driver for Macintosh 2 Double-Click on the icon for the CD-ROM disk. "A copy machine product name of use" dialog box will appear. 3 Double-Click on "the copy machine product name of use" Installer icon. The window shown on the right will appear. Click on "Continue". 4 A dialog box will - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 95
. 10 Once you're finished with the settings, click on [OK], the chooser will be displayed again. 11 Make sure that the name of this printer is selected (highlighted) in the [Select a PostScript Printer] list and close the Chooser. Once installation is complete, a "Readme" file will appear on the - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 96
all of the pages in a file, select the All radio button. To print only certain pages, type in from what page (in the From filed) to what page (in the Select", the printer will automatically select the tray that contains the most appropriate paper for the job. The factory default setting is "Auto - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 97
3. Printer Driver for Macintosh 3-4 Layout Dialog Box I Pages per sheet: Sets the number of of line to appear around the page. I Print on Both sides When this checkbox is selected, the printer will print on both sides of the paper. [Binding Enable selection of the desired the binding orientation. If - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 98
Driver for Macintosh 3-5 Printer Specific Options I Resolution: Specifies the printing resolution (number of dots per inch) to be used when printing. Select between "600 dpi" and "300 dpi". The factory default setting is "600 dpi". I Eco Print: Turning this setting "On" allows you to save on toner - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 99
that you are using. * For the user using Mac OS 7.6.1, we strongly recommend that you update the LaserWriter8.3.2 to Laser Writer 8.5.1. I Format for: Use this pop-up menu to select the Printer that you want to use. I Paper: Select in this pop-up list the desired paper size. I Orientation: Enable - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 100
3. Printer Driver for Macintosh 3-7 PostScript Dialog Box The actual layout of each dialog box and the available options and settings may differ somewhat depending upon the application - Kyocera KM-3530 | Printing System N Operation Guide (Functions Edition) - Page 101
3. Printer Driver for Macintosh 3-8 Custom paper sizes Dialog Box When a paper sizes is selected in "Custom paper sizes" Dialog Box , the paper size can be set as
Operation Guide
<Functions Edition>
Introduction
Chapter 1
Printer-related operation
■
1. Operation Keys
■
2. Procedure for Making Settings
■
3. Menu Flow Chart
■
4. Selecting the Printer Settings
■
5. Options
Chapter 2
Software-related operation
■
1. Procedure for Installing and Printing
with a Printer Driver
■
2. Windows KX Driver
■
3. Printer Driver for Macintosh