Kyocera QCP-2760 Quick Start Guide - Page 25

Battery Your phone comes with an internal LiIon battery that provides excellent talk and standby time. Leave this battery in the phone at all times. You can check the battery power level by opening the menu and selecting Display > Battery (6 8) while the phone is charging. You can safely recharge the battery at any time, even if it has a partial charge. Power save mode Your phone automatically switches to power-save mode if it has not found a signal after about 15 minutes of searching. Power-save mode decreases the drain on the battery. When the phone is in power-save mode, you cannot make or receive calls. "Power Save Mode" and the No Signal icon ( ) appear on the screen. The phone periodically rechecks for a signal. Press any key to check for service. When the phone finds a signal, it automatically switches out of powersave mode and displays the Signal Strength icon ( ). Tips for improving battery performance s Do not disassemble or short-circuit the battery. s Keep the metal contacts at the base of the battery clean. s If you have not used an internal or external battery for more than a month, recharge it before using it. s Ask your local Kyocera Wireless Corp. Service Center to replace the internal battery when it no longer maintains a charge. s Do not use any battery in direct sunlight or in places with high humidity, such as the bathroom. Quick Start Guide for QCP 860, QCP 1960, and QCP 2760 Thin Phones 21