Kyocera TASKalfa 3051ci Printing System (11),(12),(13),(14) Welcome Guide (Fie - Page 6

Configuration and Setup

Page 6 highlights

WELCOME 6 BASIC STEPS TO PRINT The following section includes a basic workflow for setting up your E100 in order to print documents. It takes you from configuring Setup to installing printer drivers to print a job. Detailed instructions for all of these procedures are found in other documents in the documentation set. For a summary of supported E100 documents, see page 4. These instructions assume that the E100 has been unpacked and connected to a network and that the E100 and copier are powered on. In some cases, initial print device settings may be required. See Configuration and Setup. The following steps assume that you are adding the E100 to a TCP/IP network that includes Windows XP user computers. Although this example is specific to a Windows XP TCP/IP environment, users in other computer environments may also benefit from these instructions.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15

W
ELCOME
6
B
ASIC
S
TEPS
TO
P
RINT
The following section includes a basic workflow for setting up your E100 in order to print
documents. It takes you from configuring Setup to installing printer drivers to print a job.
Detailed instructions for all of these procedures are found in other documents in the
documentation set. For a summary of supported E100 documents, see
page 4
.
These instructions assume that the E100 has been unpacked and connected to a network and
that the E100 and copier are powered on. In some cases, initial print device settings may be
required. See
Configuration and Setup
.
The following steps assume that you are adding the E100 to a TCP/IP network that includes
Windows XP user computers. Although this example is specific to a Windows XP TCP/IP
environment, users in other computer environments may also benefit from these instructions.