Kyocera TASKalfa 6501i 6501i/8001i Operation Guide - Page 467
Removable Memory is
View all Kyocera TASKalfa 6501i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 467 highlights
Troubleshooting > Troubleshooting Message Checkpoints Corrective Actions Reference Page Removable Memory is ― full.* The job is canceled. Press [End]. ― Insufficient free space in the removable memory. Delete unneeded files. Remove originals in the Are there any originals left in the Remove originals from the ― document processor. document processor? document processor. Replace all originals and - press [Continue]. Remove originals from the - document processor, put them back in their original order, and place them again. Press [Continue] to resume printing. Press [Cancel] to cancel the job. Replace the waste toner Is the waste toner box full? box. Replace the waste toner box. page 10-9 * When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. S Message Scanner memory is full.* - Checkpoints Send Error.* - Corrective Actions Reference Page Scanning cannot be performed due - to insufficient memory of the scanner. Follow the instructions on the screen. An error has occurred during transmission. The job is canceled. Press [End]. Refer to Responding to Send Error for the error code and corrective actions. page 10-30 Skewed originals or ― multi originals fed at once. See the caution attached on the ― document processor and check the originals. If the originals are jammed, follow the instructions on the screen to remove the originals. Staple is empty. (Manual Staple) Staple is empty. * Has staple cartridge holder A run out of staples? Has staple cartridge holder run out of staples? Add staples to staple cartridge holder A. page 10-11 If the staples are depleted, the machine will stop and the location of staple depletion will be indicated on the screen. Leave the machine on and follow the instructions to replace the staple case. Press [Continue] to print without stapling. Press [Cancel] to cancel the job. page 10-11 Staple jam. - If a staple jam occurs, the machine will stop and the location of the jam will be indicated on the screen. Leave the machine on and follow the instructions to remove the jammed staple. page 10-61 System error. - System error has occurred. Follow - the instructions on the screen. * When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. 10-27