Kyocera TASKalfa 6501i 6501i/8001i Operation Guide - Page 473
Tone Curve Adjustment
View all Kyocera TASKalfa 6501i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 473 highlights
Troubleshooting > Troubleshooting Adjustment/Maintenance Tone Curve Adjustment After prolonged use, or from the effects of surrounding temperature or humidity, the printed output tone may differ from the original. Perform this function to ensure consistency with the original tone. Before executing Tone Curve Adjustment, execute calibration (see page 10-35). NOTE To perform tone curve adjustment, verify that either Letter or A4 paper is loaded into a cassette. A total of 2 pattern pages (No. 1 and 2) are printed during adjustment. The printed patterns are read sequentially during the adjustment. 1 Display the screen. 1 Press the [System Menu] key. 2 Press [ ], [Adjustment/Maintenance], [ ] and then [Next] of "Tone Curve Adjustment". 2 Adjust the tone curve. 1 Press [Start]. A pattern is printed. Check that the number "1" is printed at the bottom of the pattern. 2 As shown in the illustration, place the printed side down on the platen with the edge with the arrows toward the back. 3 Press [Start]. The pattern is read and adjustment begins. The second pattern is output. 4 Check that the number "2" is printed at the bottom of the pattern and repeat steps 2 to 3 to read the pattern. 5 Press [OK] in the adjustment end confirmation screen. 10-33