Kyocera TASKalfa 6501i 6501i/8001i Operation Guide - Page 468
The slit glass requires
View all Kyocera TASKalfa 6501i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 468 highlights
Troubleshooting > Troubleshooting T Message Checkpoints Corrective Actions Reference Page The cover is open. Is there any cover which is open? Close the cover indicated on the ― screen. The folding unit is open. - Close the folding unit. - The password does not Is the password expired? meet password policy. Change the login password. The job is canceled. Press [End]. page 9-7 page 9-8 Is the password policy requirement (such as password length or required characters) changed? Confirm the password policy requirements and change the login password. The job is canceled. Press [End]. page 9-7 page 9-8 The power cable is ― unplugged. Turn the main power switch off and - check that the power cable is correctly plugged. After checking the power cable, turn the main power switch on. The print system Is the printer driver for this product Check the product name of the - connected to the current used? machine and reinstall the printer port is not supported by driver. the printer driver. Use a printer driver for this port that matches the print system. The removable memory Is the removable memory formatted Perform [Format] on this machine. ― is not formatted. by this machine? The slit glass requires - cleaning. Clean the slit glass using the cleaning cloth supplied with the document processor. page 10-3 This user account is - locked out. Contact administrator. ― The job is canceled. Press [End]. Toner container is ― empty. Replace the toner container to our specified toner container. page 10-6 Toner is empty. - Replace the toner container to our specified toner container. page 10-6 Toner is low. (Replace - when empty.) It is almost time to replace the toner - container. Obtain a new toner container. Tray # is full of paper. Is the acceptable storage capacity Remove the paper. Printing then - exceeded? resumes. Is the paper curled? Check the checkpoints of "Printouts are curled." in Solving Malfunctions and take the corrective actions. page 10-17 10-28