LG 37LB5D Owner's Manual (English) - Page 107

*Real data mapping 1 0 : Step 0 A : Step 10 (SET ID 10) F : Step 15 (SET ID 15) 10 : Step 16 (SET ID 16) 63 : Step 99 (SET ID 99) 64 : Step 100 10. Color (Command2:i) To adjust the screen color. You can also adjust color in the Picture menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64(*transmit by Hexadecimal code) *Refer to 'Real data mapping 1'. See page 105. Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x] 11. Tint (Command2:j) To adjust the screen tint. You can also adjust tint in the Picture menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 0 ~ Green : 64(*transmit by Hexadecimal code) *Refer to 'Real data mapping 1'. See page 105. Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x] 12. Sharpness (Command2:k) To adjust the screen sharpness. You can also adjust sharpness in the Picture menu. Transmission [k][k][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code) *Refer to 'Real data mapping 1'. See page 105. Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x] 13. OSD Select (Command2:l) To select OSD (On Screen Display) on/off. Transmission [k][l][ ][Set ID][ ][Data][Cr] Data 0: OSD off Data 1: OSD on Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x] 14. Remote Control Lock Mode (Command2:m) To lock the remote control and the front panel controls on the set. Transmission [k][m][ ][Set ID][ ][Data][Cr] Data 0: Lock off Data 1: Lock on Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x] If you're not using the remote control and front panel controls on the TV, use this mode. When main power is on/off, remote control lock is released. 15 Treble (Command2:r) To adjust treble. You can also adjust treble in the Audio menu. Transmission [k][r][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code) *Refer to 'Real data mapping 1'. See page 105. Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x] 16. Bass (Command2:s) To adjust bass. You can also adjust bass in the Audio menu. Transmission [k][s][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code) *Refer to 'Real data mapping 1'. See page 105. Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x] 17. Balance (Command2:t) To adjust balance. You can also adjust balance in the Audio menu. Transmission [k][t][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code) *Refer to 'Real data mapping 1'. See page 105. Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x] 18. Color Temperature (Command2:u) To adjust color temperature. You can also adjust color temperature in the Picture menu. Transmission [k][u][ ][Set ID][ ][Data][Cr] Data 0: Medium 1: Cool 2: Warm 3: User Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x] APPENDIX 105