LG 43SE3KE-B User Guide - Page 45
Power] Command: k a, Select Input Command: x b, Aspect Ratio] Command: k c, Power Saving] Command: j
View all LG 43SE3KE-B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
ENGLISH 45 01. [Power] (Command: k a) Controls the power on/off status of the monitor. Transmission (k)(a)( )(Set ID)( )(Data)(Cr) Data 00: Off 01: On Acknowledgment (a)( )(Set ID)( )(OK/NG)(Data)(x) * The Acknowledgment signal is returned properly only when the monitor is fully powered on. * There may be a delay between the Transmission and Acknowledgment signals. * This feature may not be available for all models. 04. [Power Saving] (Command: j q) Configures the Power Saving mode. Transmission (j)(q)( )(Set ID)( )(Data)(Cr) Data 00: [Off] 01: [Minimum] 02: [Medium] 03: [Maximum] 05: [Screen Off] Acknowledgment (q)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models. 02. Select Input (Command: x b) Selects an input signal. Transmission (x)(b)( )(Set ID)( )(Data)(Cr) Data 20: AV 40: Component 60: RGB 70: D VI-D (PC) 80: D VI-D (DTV) 90: H DMI (HDMI1) (DTV) A0: H DMI (HDMI1) (PC) 91: H DMI2/OPS (DTV) A1: H DMI2/OPS (PC) C0: D ISPLAYPORT (DTV) D0: D ISPLAYPORT (PC) 98: O PS (DTV) A8: O PS (PC) Acknowledgment (b)( )(Set ID)( )(OK/NG)(Data)(x) * Some input signals may not be available for all models. 03. [Aspect Ratio] (Command: k c) Adjusts the aspect ratio of your monitor. Transmission (k)(c)( )(Set ID)( )(Data)(Cr) Data 02: [Full Screen] 06: [Original] Acknowledgment (c)( )(Set ID)( )(OK/NG)(Data)(x) * The aspect ratio may differ depending on the model's input configuration. 05. [Picture Mode] (Command: d x) Selects a picture mode. Transmission (d)(x)( )(Set ID)( )(Data)(Cr) Data 00: [Mall/QSR] 01: [General] 02: [Gov./Corp.] 03: [Transportation] 04: [Education] 05: [Expert] (Expert 1) 06: [Expert] (Expert 2) 08: [APS] 11: [Calibration] Acknowledgment (x)( )(Set ID)( )(OK/NG)(Data)(x) * Some picture modes may not be available for all models. 06. [Contrast] (Command: k g) Adjusts the screen contrast. Transmission (k)(g)( )(Set ID)( )(Data)(Cr) Data 00-64: Contrast 0-100 Acknowledgment (g)( )(Set ID)( )(OK/NG)(Data)(x)