LG 43SE3KE-B User Guide - Page 53
Local Key Operation Lock] Command: t o
View all LG 43SE3KE-B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
ENGLISH 53 51. [Local Key Operation Lock] (Command: t o) Configures the local key operation settings of the product. Transmission (t)(o)( )(Set ID)( )(Data)(Cr) Data 00: U nlocks all keys 01: L ocks all keys except Power key 02: L ocks all keys Acknowledgment (o)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models. 54. [PM Mode] (Command: s n, 0c) Sets the PM mode. Transmission (s)(n)( )(Set ID)( )(0c)( )(Data)(Cr) Data 00: [Power Off] 01: [Sustain Aspect Ratio] 02: [Screen Off] 03: [Screen Off Always] 04: [Screen Off & Backlight On] Acknowledgment (n)( )(Set ID)( )(OK/NG)(0c)(Data)(x) * This feature may not be available for all models. 52. Status Check (Command: s v) Checks the current signal of the product. Transmission (s)(v)( )(Set ID)( )(Data)( )(FF)(Cr) Data 02: C heck whether there is a signal 10: R GB Sensor OK/NG(Check Screen) Acknowledgment (v)( )(Set ID)( )(OK/NG)(Data)(Data1)(x) Data Data1 02 (when a signal is found) 00: N o signal 01: S ignal present Data 10 (Check Screen) Data1 00: C heck Screen result NG 07: C heck Screen result OK * When Check Screen is set to Off or not supported, execution results are rendered "NG." 53. [Screen Fault Detection] (Command: t z) Sets the Screen Fault Detection feature. Transmission (t)(z)( )(Set ID)( )(Data)(Cr) Data 00: Off 01: On Acknowledgment (z)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models. 55. [Screen Off Always] (Command: j p) If you activate the Screen Off Always feature, the monitor enters Screen Off mode regardless of whether or not you have activated PM mode. Transmission (j)(p)( )(Set ID)( )(Data)(Cr) Data 00: On (Screen on) 01: Off (Screen off) * This feature may not be available for all models. Acknowledgment (n)( )(Set ID)( )(OK/NG)(0d)(Data)(x) 56. [Auto Config.] (Command: j u) Automatically corrects the position and shaking of the picture. (Works only in RGB-PC input mode.) Transmission (j)(u)( )(Set ID)( )(Data)(Cr) Data 01: Execute Acknowledgment (u)( )(Set ID)( )(OK/NG)(Data)(x)