LG 43SE3KE-B User Guide - Page 9

No Signal Power Off]15 min., No IR Power Off], DPM Wake Up Control]

Get LG 43SE3KE-B PDF manuals and user guides View all LG 43SE3KE-B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

ENGLISH 9 [Power] [General] [Power] Power-related feature settings [No Signal Power Off](15 min.) Set whether to use the 15 Min Auto Off feature. •• You can set this option to [On] or [Off]. •• If you set this feature to [On], the product turns off when it has remained in No Signal status for 15 minutes. •• If you set this feature to [Off], the 15 Min Force Off feature is disabled. •• It is recommended that you set this feature to [Off] if you intend to use the product for long periods of time as the feature turns the power of the product off. [No IR Power Off] Set whether to use the No IR Power Off feature. •• You can set this option to [Off], [2 hours], [4 hours], [6 hours], or [8 hours]. •• If you set this feature to [2 hours], [4 hours], [6 hours] or [8 hours], the product turns off if there is no input from the remote control for the corresponding period. •• If you set this feature to [Off], the No IR Power Off feature is disabled. •• It is recommended that you set this feature to [Off] if you intend to use the product for long periods of time as the feature turns the power of the product off. [DPM] Set the Display Power Management (DPM) mode. •• If this feature is not set to [Off], the monitor will enter DPM mode when there is no input signal. •• If you set this feature to [Off], [DPM] is disabled. •• You can set this feature to [Off], [5 sec.], [10 sec.], etc. [DPM Wake Up Control] Set conditions for releasing the DPM status according to the digital signal processing of the connected DVI/HDMI port. •• When set to [Clock], the set checks for digital clock signals and releases the DPM status once it finds the clock signal. •• When set to [Clock+DATA], the set releases the DPM status when both the clock signal and data of the digital signal are entered.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
ENGLISH
9
[Power]
[General]
[Power]
Power-related feature settings
[No Signal Power Off](15 min.)
Set whether to use the 15 Min Auto Off feature.
•
You can set this option to [On] or [Off].
•
If you set this feature to [On], the product turns off when it has remained in No Signal status for 15 minutes.
•
If you set this feature to [Off], the 15 Min Force Off feature is disabled.
•
It is recommended that you set this feature to [Off] if you intend to use the product for long periods of time as the
feature turns the power of the product off.
[No IR Power Off]
Set whether to use the No IR Power Off feature.
•
You can set this option to [Off], [2 hours], [4 hours], [6 hours], or [8 hours].
•
If you set this feature to [2 hours], [4 hours], [6 hours] or [8 hours], the product turns off if there is no input from
the remote control for the corresponding period.
•
If you set this feature to [Off], the No IR Power Off feature is disabled.
•
It is recommended that you set this feature to [Off] if you intend to use the product for long periods of time as the
feature turns the power of the product off.
[DPM]
Set the Display Power Management (DPM) mode.
•
If this feature is not set to [Off], the monitor will enter DPM mode when there is no input signal.
•
If you set this feature to [Off], [DPM] is disabled.
•
You can set this feature to [Off], [5 sec.], [10 sec.], etc.
[DPM Wake Up Control]
Set conditions for releasing the DPM status according to the digital signal processing of the connected DVI/HDMI port.
•
When set to [Clock], the set checks for digital clock signals and releases the DPM status once it finds the clock
signal.
•
When set to [Clock+DATA], the set releases the DPM status when both the clock signal and data of the digital signal
are entered.