LG LHX-557 Owners Manual - Page 34

Tape Counter Memory Feature, Additional Information

Page 34 highlights

Tape Counter Memory Feature Additional Information Real-Time Counter Shows length of tape run in hours, minutes, and seconds. Press CLK/CNT to select the real-time counter display. Every press of CLK/CNT changes the TV screen display as illustrated below. 2:15 AM CLOCK 0:05:25 COUNTER REM 1:07 REMAINING TIME Counter changes to "0:00:00" when the cassette is ejected. The real-time counter does not operate if nothing is recorded on the tape. The real-time counter will not work unless a tape is inserted. Counter Memory Feature This is useful if there is a section of tape you want to view immediately after recording or if you want to return to the same point several times. 1. Begin recording or playing a tape. 2. Press CLK/CNT repeatedly to display the real-time counter on the TV screen. 3. At the point that you want to locate later, reset the real-time counter to "0:00:00" by pressing CLEAR. 4. Continue to play or record. 5. Press STOP (x) once or twice when recording or playback finishes. 6. Press BACKWARD (.). The tape automatically stops when the tape counter returns to about "0:00:00". Tape Remaining This function shows the remaining time on the tape during recording or playback. Press CLK/CNT repeatedly until the REM indicator appears on the TV screen during recording or playback. Note: The remaining tape length indicator may not be displayed correctly depending on the condition of the tape and the kind of the tape (T-140, T-160, or T-210 etc.) In manual recording, Timer recording, Instant Timer Recording, playback, or fast forward modes, the Home Theater System automatically starts rewinding the tape at the end of the tape. The cassette will stop at the beginning of the tape and be ejected, and the Home Theater System will turn itself off. After you have finished using the Home Theater System, rewind, eject, and remove the cassette. Place the cassette in its protective sleeve to protect it from dust. It is not necessary to rewind the cassette before removing it, but if you do, it will be ready to play or record the next time you use it. Be sure the Home Theater System Channel Selector is on the correct channel you wish to record. The channel that is being recorded can always be checked by tuning the television to the Home Theater System channel (3 or 4) and using the TV/VCR selector to turn the Home Theater System's TV indicator off. Do not attempt to hook up more than one television set to the Home Theater System for either recording or playback. Auto Play System This Home Theater System features automatic playback. Load a cassette (with the safety tab removed). The Output Source is changed to VCR mode automatically. The power turns on automatically and playback begins. At the end of the tape, the Home Theater System stops and rewinds the tape. The cassette is ejected after rewinding and the VCR turns itself off automatically. LOAD TAPE AUTO PLAY AUTO REWIND AUTO EJECT AUTO POWER OFF Note: Auto power off does not function during regular DVD play mode. (Home Theater System power stays on.) 34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

34
Tape Counter Memory Feature
Real-Time Counter
Shows length of tape run in hours, minutes, and
seconds. Press
CLK/CNT
to select the real-time
counter display.
Every press of
CLK/CNT
changes the TV screen
display as illustrated below.
z
Counter changes to “0:00:00” when the cassette is
ejected.
z
The real-time counter does not operate if nothing is
recorded on the tape.
z
The real-time counter will not work unless a tape is
inserted.
Counter Memory Feature
This is useful if there is a section of tape you want to
view immediately after recording or if you want to
return to the same point several times.
1. Begin recording or playing a tape.
2. Press CLK/CNT repeatedly to display the
real-time counter on the TV screen.
3. At the point that you want to locate later, reset the
real-time counter to “0:00:00” by pressing CLEAR.
4. Continue to play or record.
5. Press STOP (
x
) once or twice when recording or
playback finishes.
6. Press BACKWARD (
.
).
The tape automatically stops when the tape counter
returns to about “0:00:00”.
Tape Remaining
This function shows the remaining time on the tape
during recording or playback.
Press
CLK/CNT
repeatedly until the REM indicator
appears on the TV screen during recording or
playback.
Note:
The remaining tape length indicator may not be displayed
correctly depending on the condition of the tape and the kind
of the tape (T-140, T-160, or T-210 etc.)
Additional Information
z
In manual recording, Timer recording, Instant Timer
Recording, playback, or fast forward modes, the Home
Theater System automatically starts rewinding the tape at
the end of the tape. The cassette will stop at the
beginning of the tape and be ejected, and the Home
Theater System will turn itself off.
z
After you have finished using the Home Theater System,
rewind, eject, and remove the cassette. Place the
cassette in its protective sleeve to protect it from dust. It
is not necessary to rewind the cassette before removing
it, but if you do, it will be ready to play or record the next
time you use it.
z
Be sure the Home Theater System Channel Selector is
on the correct channel you wish to record. The channel
that is being recorded can always be checked by tuning
the television to the Home Theater System channel (3 or
4) and using the
TV/VCR
selector to turn the Home
Theater System’s TV indicator off.
z
Do not attempt to hook up more than one television set to
the Home Theater System for either recording or
playback.
Auto Play System
This Home Theater System features automatic
playback.
Load a cassette (with the safety tab removed).
z
The Output Source is changed to VCR mode
automatically.
z
The power turns on automatically and playback begins.
z
At the end of the tape, the Home Theater System stops
and rewinds the tape.
z
The cassette is ejected after rewinding and the VCR turns
itself off automatically.
Note:
Auto power off does not function during regular DVD play
mode. (Home Theater System power stays on.)
2:15 AM
0:05:25
REM 1:07
CLOCK
COUNTER
REMAINING TIME
LOAD
TAPE
AUTO
REWIND
AUTO
POWER
OFF
AUTO
EJECT
AUTO
PLAY